Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Red Tip turning

Posts

Red Tip turning

#1

Red Tip turning

Phillip Medghalchi

Here are two bowls I have recently finished.



other views for critique



2nd bowl





here you can see the striking heart wood grain pattern with all the color



In the second bowl collage picture the one on the bottom right shows a bark inclusion that I incorporated it into the design. it's is filled just slightly to allow for applying the finish without it getting clouded.

Both got 4-5 coats of Myland Friction polishes. I am not sre if they are food safe use, with Myland.

CC welcomed. these were finished in Oct. 2014. they had no cracks in them just some voids that I thought wold be better to be all same surface, so some are filled with the same wood dust in order for the Myland polish to og on smooth and not cause any whitening effect. All the colors yo see in both bowls are the natural grain pattern in this unusual ornamental tree. the neighbor whom I got this tree log from is getting ready to cut the other tree down because the builder planted it too close to the house, if and when I get it I will post it here if any of you is interested to give it a try I am willing to swap with you.

I am gald this site doesn't have restrictions like some other sites that has to be 5 in a week and you can shoe other views of it for clarifications, as long as the pictures are under 100k. My hats off to Ellis for providing us with such a wonderful site that we can all come together and show our works and share our experiences. Please refrain from mentioning any sites name or any person's please.

Re: Red Tip turning

#2

Re: Red Tip turning

Bob Hayward

I almost cannot believe that in over 24 hours no one has commented on this nice work.

Nice job, I like them.

Bob

Re: Red Tip turning

#3

Re: Red Tip turning

Phillip Medghalchi

Thank you Bob, I don't mind it at all perhaps they are busy or on other forums.

Re: Red Tip turning

#4

Re: Red Tip turning

Don Evans

Phil:

Mylands Friction Polish is shellac and it is NOT Dewaxed. Point to that is you cannot use it and put another finish on top of it like lacquer etc.

The thing to understand is this is not a water resistant finish and if someone spills alcohol on it such as in a drink it will strip the shellac right off the bowl.

In my early turning days I used it on small things like ballpoint pen and then saw a friend stir a drink with his PEN, guess what happened, he made himself a fresh drink and I refinished the pen for him with polyurethane.

As far as being safe food finish, it is safe but not durable at all for anything other than candy dish with wrapped candy. We all eat shellac at one time or another, any pill with hard easy to swallow coating is probably shellac on it. And M&M's shellac on them keeps them from melting in your hand, remember the jingle? Melts in your mouth not in your hand.

By the way, shellac is bug spit coming from the Lac bug in Indonesia I believe. Food shellac is I'm sure put through more filtering to remove bug legs and stuff from the other end of the bug than shellac used in wood finishes, ugh!!

Don

Re: Red Tip turning

#5

Re: Red Tip turning

Phillip Medghalchi

Don, thank you for the information, it's very helpful. Those bowls I made are decorative and I intend to let the receiver person know that do not use them for wet food purposes. I am glad you mentioned this and I do make a little information card to give it to the person who receives it along with all my turnings so they know how to take the best care of them. During the last winter I started a thread here asking the turners that what you guys use in the winter when the temperature does not fit shooting lacquer and I was told that use Wipe on poly, so I recently started using it, because of the high humidity we have down here in S. TX and it's hard to shoot lacquer when I do not have a properly equipped booth for shooting lacquer w/o having problem with blushing. Also, I was not happy with 7 or 8 of my latest works that had lacquer finish on them which got some rainwater hitting them, now I have a big mess on my hands trying to refinish those pieces where there no tenons on them to remount and re-sand them and start over again. I have been very happy with the wipe on poly results, it gives right sheen and it helps me to apply finish w/o worrying to really set up and elaborate finishing station. I called Min wax co. and unfortanely the lady who as helping me was not that helpful answering my qsn.s and I am not sure that if the wipe on poly turns out to be water resistant or not. And, when I asked she said that they do not recommend the poly applied turnings to be used for food use. Therefore, so far I have used it on my decorative pieces and I have been using Watco butcher block finish on my utilitarian pieces, because on the can label it says that it complies with FDA regulation for being food safe finish. the reason you see these bowls finished with Myland Friction polish is that I finally go the hang of it and since I am half way through the bottle I wanted to use it up. I guess you'd like the next few pieces that I will put here to show that i have used the Myland polish that turned out pretty good. I am very much leaning on using this finish on smaller turnings rather on the big one. What I am not sure of is that can you buff it after the the finish is cured with the Beall system or not. I appreciate any one who reads this cna help with this qsn.

Re: Red Tip turning

#6

Re: Red Tip turning *LINK*

Mike Brazeau

Nice looking bowl Phillip. Couple of comments on Mylands Quick Build. It is most useful on spindle work where the small diameter allows fast rotation and the ability to build up some heat to smooth it out. A tip I picked up years ago was to use good quality paper towel like Bounty to apply and keep moving the paper so that the area with the Mylands and dry paper alternately comes into contact and that creates a high lustre finish. It generally does not require additional polishing but a final coat of microcrystalline wax will seal it additionally. One final comment about using it up. I have had some for ten years and it still works fine. I put it in a small dispensing bottle with a snap cap. A bottle with a brush in the cap also works well. Do not over apply initially as it will build up in streaks. A number of thin layers is best. General Finishes have a relatively new water based friction polish which seems to get good reviews as well. I have a new bottle of Mylands so am good for another ten years.


The Joy of Wood