Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

carving and turning Padauk

Posts

carving and turning Padauk

#1

carving and turning Padauk

John Lucas

I forgot how orange everything gets when your working with this wood. I'll be totally Orange by the end of the day. Of course if I live in Knoxville that would be perfectly acceptable. Heck they would probably sue me if I went out looking like this saying I hadn't been properly licensed by the Vols.

If you've used this wood you know it darkens quite a bit to UV light. I may have to put these mirrors in the sun for a week or so before I give them to the client so they will have at least some darkening and the color won't change as dramatically after he gives them to his daughters.

I'll try to get a photo when I get them done and then again after I age them a little.

Re: carving and turning Padauk

#2

Mike Stafford

Re: carving and turning Padauk

Mike Stafford

Padauk is one wood that is off my list of woods that I can work. I find it very astringent as it irritates my throat to the point where I feel uncomfortable in my throat.

That is a bad sign so I quit working with it. Besides it turns a muddy brown in a relatively short time after working with it.

Re: carving and turning Padauk

#3

Re: carving and turning Padauk

John Lucas

Yea not my favorite wood but this is what my friend purchased to make the mirrors. The wood is also 1/2" thick and I usually make my mirrors from 3/4" so it ends up about 9/16 to 5/8 thick. Since this is too thin to put a handle on in the normal fashion I have completely changed the design and come up with a totally new mirror. He also purchased 6" glass to these are going to be quite large.

Re: carving and turning Padauk

#4

Re: carving and turning Padauk

Keith Newton

If you mix up some caustic soda / lye, and wet it, it turns a much deeper purplish color similar to East Indian Rosewood. I made a bed for a client over 30 years ago, and inquired about it a few months ago. He says the color is the same, although I have not seen it, and he may not have noticed the change since it would have been gradual.

Re: carving and turning Padauk

#5

Re: carving and turning Padauk

Craig Daymon

I'll admit that if it would keep that bright orange color, there would be some interesting design possibilities. But I personally rather like the color it changes to, which I would consider to be, burnt umber.

I used it for a finial on a tall container a little while back. I'll see about getting a picture up. Nothing extraordinary, but nice woods.

I have a bag of the dust saved up. I suspect I still need much more. I want to use the dust to dye some T-shirts. Thought it would be cool, as a turner, to wear a T-shirt that was colored using sawdust. Padauk is/was used to make dyes for clothing. Bois de Rose rosewood too, and I have some of that dust saved as well, but I believe that is far too expensive and rare to manage to get enough dust from without wasting what little I have. (Finial stock. Deep purple color.) Need to learn more about the dye making process before going further with it.

Re: carving and turning Padauk

#6

Re: carving and turning Padauk

John Lucas

Craig I used to save all kinds of wood saw dust for a fiber artist in our area. She uses natural dyes for all of her clothing. Personally I just rub it in while I'm turning and the shirt never really gets clean after that. Saves all the trouble of mixing up the dye.

Re: carving and turning Padauk

#7

Re: carving and turning Padauk

Bruce Markwardt

I built a bed and nightstand from padauk about 30 years ago. It is now a really nice maroonish brown color with visible but not prominent grain. Personally, I think it is very classy looking. Back when I used to do a lot of flat work it was one of my favorite woods.

Re: carving and turning Padauk

#8

Re: carving and turning Padauk

John Veerkamp

I used to do natural dyeing for our fiber guild. The process is fairly simple.

1. Boil /simmer the sawdust in water.

2. Pre-wet the garment. Then immerse the fabric. Make sure there is plenty of water so that the fabric is loose in the solution.

3. Rinse the fabric.

4. Soak the fabric in a mordant (a metal salt solution often alum) to set the dye.

5. Hang to dry.

Note be sure to use a non-reactive pot for all of the processes such as enamel ware with no chips or stainless steel. Iron or aluminum will muddy the color.

There is a wealth of information on the process on the net.

Re: carving and turning Padauk

#9

Old common name of Paduak is Vermillion.

Don Orr

For the color it turns to when it ages.

Re: carving and turning Padauk

#10

Re: carving and turning Padauk

Craig Daymon

Thanks John Veerkamp, that sounds easy. I'll have to get more white Ts next time I go to the store.

John Lucas, I have a few Ts that have that style of dying, though I'd say a really bad tie-dye is the best description.

Re: carving and turning Padauk

#11

Re: carving and turning Padauk

John Lucas

yea unfortunately it tends to dye the belly of the T shirt more. Perhaps that's because of the turning muscle housed there.