Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Chatter tool, and texturing tool

Posts

Chatter tool, and texturing tool

#1

Chatter tool, and texturing tool

phillip Medghalchi

Dose any one has instructions as how to make them. Please?

Re: Chatter tool, and texturing tool

#2

Brad Vietje

Re: Chatter tool, and texturing tool

Brad Vietje

Hey Phillip,

One way to make a chatter tool is to sharpen a 3" long piece of stiff spring steel, and simply hold it in Vice Grips. Thinner steel for softer woods, and thicker, less flexible steel for harder woods. You can vary how much steel protrudes out of the pliers, and you want to rest the jaws of the pliers on the tool rest, not the springy steel.

Others here will know much more than I about good sources of appropriate steel alloys. I just used a dull Sawzall blade that had been shaped on a grinder. Make one with a "V" point, and another with a small radius at the tip, and have fun experimenting with rpm, angle, direction, etc...

I own and often use the Dennis Stewart chatter tool, but I've also used the Vice Grip & power hacksaw blade method, which works just about as well for me.

I'd love to make a rotating texturing tool -- I'll keep a lookout for a good recipe for that.

Safe spinning,

Brad Vietje

Newbury, VT

Re: Chatter tool, and texturing tool

#3

Re: Chatter tool, and texturing tool

HeatherAinAK

Here are some links I found when I was making one.

http://www.crwoodturner.com/chatterwork/index.html

http://detroitareawoodturners.com/yahoo_site_admin/assets/docs/Making_a_Chatter_Tool.312141908.pdf

http://www.aawforum.org/vbforum/showthread.php?6602-Home-Made-Chatter-Tool

http://www.syzygywoodworks.com/news/2009/11/12/homemade-chatter-tool/

http://familywoodworking.org/forums/showthread.php?2487-Homemade-Chatter-Tool

I googled homemade chatter tool and came up with a bunch.

Heather

Re: Chatter tool, and texturing tool

#4

Re: Chatter tool, and texturing tool

John Lucas

Ditto what brad said. I found used blades they use to saw the metal 2x4's work great. I found them at construction sites where they are doing office buildings. Probably my any good small saw blade would work. I think I may have plans for making an adjustable handle Ill be at my computer this afternoon and will look

Re: Chatter tool, and texturing tool

#5

Re: Chatter tool, and texturing tool

John Stegall

More links: http://nebula.wsimg.com/6747bfdd52b8f03379f95f1a8b8c191d?AccessKeyId=8E1EC0DC707F1FE36FCB&disposition=0&alloworigin=1

http://www.scrollsaws.com/WoodLathe/chattertool.htm

http://familywoodworking.org/forums/showthread.php?2487-Homemade-Chatter-Tool

http://nebula.wsimg.com/22d593c2f4832133fbafcfa3a9e61a67?AccessKeyId=8E1EC0DC707F1FE36FCB&disposition=0&alloworigin=1

Re: Chatter tool, and texturing tool

#6

Steven Antonucci

Re: Chatter tool, and texturing tool

steven antonucci


I have made bunches of these, and my favorite is made from an old bow saw blade. Just the right amount of thickness, hardness, and springiness. A jigsaw blade works too, but you need to let it out longer because it is thicker.

They don't need handles, but you can make them simply by screwing the end to a block of wood. I made tons of tops with just vise grips, but I got tired of packing them for demos, so I made the little handles.

As for knurling wheel cutters, it isn't rocket surgery? All you need is for the cutter to be on the end of a stick and able to spin freely. I buy the Sorby cutters for $12-15 ea, and I am off and running with a "close enough" through bolt as shown. I may break down some day and make something with closer tolerance, but what you see in the spirals was cut with a slightly sloppy fit...

S

Re: Chatter tool, and texturing tool

#7

Re: Chatter tool, and texturing tool

phillip Medghalchi

Thank you John.

Re: Chatter tool, and texturing tool

#8

Re: Chatter tool, and texturing tool

phillip Medghalchi

Steven, would a band saw blade of 1/2"or 3/4" work? and I have a gear wheel that I can add the pic. here for it.

Re: Chatter tool, and texturing tool

#9

Steven Antonucci

I had no luck with bandsaw blades

steven antonucci

I tried, they all broke very quickly. The bowsaw blade has been in use for 10 years

S

Re: Chatter tool, and texturing tool

#10

I made several different chatter.......

JamieDonaldson

...blades from the steel straps used for heavy duty shipping purposes. Several of the sawblades I tested were too brittle and broke.

Re: Chatter tool, and texturing tool

#11

Re: Chatter tool, and texturing tool

Terry Quiram

I have made many of these. I use 1/2" tubing with 5/16" id. Spring steel is from a piece of industrial band saw blade. I drilled and tapped through the end of the tube. (its easier to drill and tap this way) Used 2 set screws. I sharpened the end before bending.