Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

glass inside your bowl

Posts

glass inside your bowl

#1

glass inside your bowl

John Lucas

Barry brings up a good point. Have any of you turned a bowl specifically to fit a glass bowl so you could mate the two and have the best of both worlds. Glass to be easily cleaned and then the wood for show.

I have done chip and dip bowls where I turned the inner dip bowl to a size that very closely fit a removeable glass bowl. Haven't done it with larger things. I do make my goblets with glass uppers and wooden stems. In one case I even made the wood come about half way up the glass with a bark edge which sort of combines both features.

Just wondering.

Re: glass inside your bowl

#2

almost glass

Darryl

Have you ever tried to use the epoxy that is made for bar tops. You need to turn the lathe very very slowly and keep wiping the epoxy back into the interior until it gels. After it cures it is crystal clear and will withstand alcohol. It is very slow setting so it takes time.

Re: glass inside your bowl

#3

Re: almost glass

Barry Irby

In my case, the wooden root bowl turned out to be sort of basket like and the glass bowl fit inside it. It was astounding. Hard to believe it fit as well as it did since I turned the bowl without even seeing the glass one. Since the roots ran in a circle, I did not think the seasonal changes would matter much.

I have done a number of chips and dip Trays with a center cut out for a Pyrex bowl. I bought the 2 cup Pyrex bowls with snap on plastic lids and gave tow of them with each tray. Then the host could have a spare ready in the fridge and could microwave them if they wanted hot dip. I made the cutout for the bowl a little loose to allow for seasonal shifts in the wood.

I had a bowl I cut through the bottom. (I am pretty sure I am the only one here who ever did that, so this may not be useful to the rest of you.) I had a piece of agate or geode (colorful glass). I cut a recess in the bottom and glued it in. It was a beauty for a while, but the glue failed and it fell out.

Re: glass inside your bowl

#4

Re: glass inside your bowl

robo hippy

I do remember one turner some where around here who did that, but have no idea what his name is. He took custom made glass bowls and fitted them into wood. I will see if I can find out who he is. Haven't seen him in a while.

robo hippy

Re: glass inside your bowl

#5

Lyle Jamieson

Re: glass inside your bowl

Lyle Jamieson

I did a weed pot with a test tube insert from dry walnut years ago. A few years later it smashed the test tube. Keep some room for movement, don't enclose the glass with a tight fit.

Re: glass inside your bowl

#6

the one who comes to my mind is

GaryG in MD

Chris Andrew. ...GG

Re: glass inside your bowl

#8

Re: glass inside your bowl

phillip Medghalchi

Lyle, interesting, that you mentioned this. I thought that when we put some finish on the piece it lessens or slows the movement of the wood, which now I know it doesn't. Thanks for this reply. I was wanting to use a pyrex lead that we had to put it on the wood bottom and was wondering that if it needs to be a loose fit and how much should I allow for the movement. For what ever reason I hanged on to that lid and thought of making a bottom, but last week before I came to SWAT I meant to ask someone and forgot all about it.

Have you done such a thing, and if you did how much do you allow for the the lid opening?

Re: glass inside your bowl

#9

Lyle Jamieson

Re: glass inside your bowl

Lyle Jamieson

My guess would be 5 to 10 percent of diameter of slop would be enough for any movement to be safe.

Re: glass inside your bowl

#10

yes, that's his work

GaryG in MD

Although I saw it many years ago, I never forgot it, and I'm thinking again about trying to do something like that. I love combinations of wood and glass, if they're done thoughtfully and well. ...GG