Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Do you ever have a Blow Out Day

Posts

Re: Do you ever have a Blow Out Day

#26

Mike Peace

Re: RISK & Dale Nish's bowl speed formula

Mike Peace

Geoff had the formula in his email. But if you need to see it somewhere else, it is posted on page of the current Craft Supply catalog.

Re: Do you ever have a Blow Out Day

#27

Re: Do you ever have a Blow Out Day

clay foster

Pay very close attention to what John says.

There are a few demonstrators out there on the circuit who crank the lathe up as fast as it will go because it is dramatic showmanship. Beginners who don't know better try to emulate them, and some are getting hurt and even killed. Don't become one of them.

Re: Do you ever have a Blow Out Day

#28

Re: RISK & Dale Nish's bowl speed formula

Geoff Whaling

:D No problem about the name. I thought you were paying me a compliment (Wally Dickerman?) 8) Hence the Hawkeye line from MASH.

As Mike says the formula was the opening line in my orig post. It is attributed to Dale but I have not seen his books so I can't say for certain where it first appeared.

Lyle Jamieson also gives a good response on lathe/blank speed in his newsletter https://www.lylejamieson.com/newsletter/2013_dec/december2013print.pdf

Re: Do you ever have a Blow Out Day

#29

Thank you Clay

Geoff Whaling

Clay, thank you for saying that. I wish more very respected turners such as yourself would step up and make similar affirmations or have a quiet chat to these guys. Peer review is a very powerful tool & it is very good to see the AAW working at this but still a long way to go.

IMO there are some demonstrators who should not be permitted to demo at high profile events (or others) until they modify their acts. Fair enough if they wish to turn at high speeds in their own workshops, their free choice, but please don't advocate turning at high speeds to the wider turning family. As another turner said a while ago "if all the other ducks are in a row" they can do it because they have experience & knowledge of what to watch out for. Not many turners really understand the hazards & the risk with high speed turning or how to minimize that risk.

Unfortunately what you say is the sad reality of inexperienced turners emulating there idols.