New Oliver lathe
Keith Tompkins
I saw an ad in the latest AAW magazine for a new Oliver lathe, so decided to check it out. It seems like a heavy duty, well designed machine except for one detail....there is a lever on the headstock that looks like the old Reeves drive setup on older equipment... Indeed it is. So, is this a deal killer? Looking through the operator's manual, it has a two-speed quick change setup with a cog-toothed belt, and a single phase 2 HP reversible motor. Why would they produce something with an apparently obsolete design? I'm thinking simplicity...no electronics, inverters, etc, and the motor always runs at full speed, which will keep it running cooler. There are Reeves-drives lathes out there still operating after many decades...is a modern version viable? To those not familiar with Oliver equipment, their reliability is legendary. One true example: The shop I work in has an Oliver Straitoplaner, produced in 1950. This machine planes both surfaces of a board simultaneously. This machine has been in constant use, and has conservatively planed 4 million (yes, million) board feet of oak, maple and poplar with nothing but routine maintenance.



