Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

lathe spindle log tip

Posts

lathe spindle log tip

#1

lathe spindle log tip

John Lucas

I have a total mental block on the gentleman's name that I stayed with in Virginia. I hope someone can tell me so I can give proper credit for this. I had a ball in his shop he had so many good ideas. This was one of the best. You know how hard it is to sand specific areas of natural edge bowls. I usually do it with the lathe off and will often put my index wheel on the lathe so I can index it where ever I need for proper sanding. This is faster and works great.

when you want to lock the bowl in any position just tighten up the top screw on the hand screw clamp. Loosen it to reposition and tighten it again. Fantastic. You can loosen it a little more and actually run the lathe with the clamp still sitting there. I love it. Works great.

Re: lathe spindle log tip

#2

Peter Toch gave me this tip- Thanks Willie


Re: lathe spindle log tip

#3

Re: lathe spindle log tip

Don Orr

Great tip-thanks!

Re: lathe spindle log tip

#4

Re: lathe spindle log tip

robo hippy

I think one short coming of the 3520 lathe is that the spindle lock is only 2 positions. It is also spring loaded, so you can't start your lathe with it engaged. While it works, I think one big advantage of the Robust lathes is a 4 position spindle lock, and it has a dead man electrical link so if you try to start the lathe with the spindle lock engaged, it won't start up. I had to call Brent once to find out why my lathe wouldn't turn on. "Now Reed, I know you are a very experienced turner, but did you flip the spindle lock all the way down???".

Now, all some one needs to invent is a lathe where when you turn it off, the electronic variable speed reverts to 0 rpm. No accidental starting the lathe up at full speed....

robo hippy

Re: lathe spindle log tip

#5

Re: lathe spindle log tip

John Lucas

Reed The VFD on the Powermatic won't let it start if anything is stopping the spindle. It could be the wood is hitting the tool rest or if you left the spindle lock, locked. There are a whole bunch of fixes for the spindle lock to lock. I made one of them but have never needed it.

I like having far more than 2 or 4 positions to place the bowl in when sanding or even carving. That's where this tip really comes in handy.

Re: lathe spindle log tip

#6

Re: lathe spindle log tip

robo hippy

John,

Well, I had one of the early A models with the cast metal bottom plate on the headstock. I started it up more than once with the spindle lock engaged, and got the squealing belt noises. Glad they improved it. I do use my 4 position spindle lock on some of my warped madrone bowls, because even at 20 rpm, I can't keep abrasives on the wood.

robo hippy

Re: lathe spindle log tip

#7

Re: lathe spindle lock tip

Doug Wolf

Thanks for posting the picture and tip John.

I used it yesterday on my Powermatic and wondered why I hadn't thought of that myself.

Keep posting tips.

PS I already copied your router sled and several other ideas.