Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

new American Woodturner

Posts

new American Woodturner

#1

new American Woodturner

John Lucas

Just got it yesterday. Started reading it last night. Excellent article by Leon Olson on cleaning and repairing Morse tapers. The best tip ever was to use a 12 gauge shotgun cotton cleaning swab to clean the inside of the taper before inserting the morse taper.

Looks like it's going to be a very good issue.

Re: new American Woodturner

#2

Re: new American Woodturner

Dick Coers

I haven't read the entire article on CA as a finish, but on caption next to a picture says CA doesn't adhere well to metal bushings. Well I must be doing something WAY WRONG! I've glued bushings to the blank, and had to soak the bushings in acetone to clean them. I also didn't see any reference to cracking issues that have been coming up a lot more on IAP site.

Re: new American Woodturner

#3

Re: new American Woodturner

Steve Kniffen

Dick,

If you rub a little paste wax on your bushings, the CA glue won't stick to them. Don't remember where I got the tip, but it works well.

Steve

Re: new American Woodturner

#4

Re: new American Woodturner

Bruce Pratt

..including the shoulder of the bushing which contacts the brass and the end of the blank...

Re: new American Woodturner

#5

Re: new American Woodturner

John Lucas

Wax works well as a resist for all sorts of glues. I've used it frequently for CA or epoxy to keep the glue from sticking to surfaces I don't want. I had to repair a cheap foam picture frame for a friend this weekend. It was black. I mixed up epoxy and dyed it black. Waxed the front surface and then glued all 4 corner joints. Used blue tape to hold it together while the epoxy dried. When it was dry I was able peel epoxy that bled out of the joint on the front side using my fingernail which left the frame looking like it was brand new and was probably stronger.

Re: new American Woodturner

#6

Re: new American Woodturner

Josh_Bowman

I loaned mine out to a potential AAW member, thinking I could just read it on line. Only the June is up. When do they put the new on line?

Re: new American Woodturner

#7

Re: new American Woodturner

Dwight rutherford

I was/am confused. I chose to get mine electronically and also see only the June issue available.

Re: new American Woodturner

#8

Re: new American Woodturner

John Lucas

Well I would say you need to send the AAW a letter. It used to come out before I get my hard copy

Re: new American Woodturner

#9

Re: new American Woodturner

Dwight rutherford

I asked about this yesterday and was told the electronic issue will be posted today.