Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

PlateHolder

Posts

PlateHolder

#1

PlateHolder

Mike Potts

Does anyone have plans or good photo of a wooden plate holder? A very good friend of mine is having his 60th birthday this Sat and I wold like to make a plate holder for this plate I turned for him. It's something I'm sure I could figure out, but why re-invent the wheel if you can get some help.

Thanks

Mike

P.S. Gary thanks for the links on photo set-up. I will be using them soon.




Re: PlateHolder

#2

Re: PlateHolder

John Lucas

Mike I have designed one but you need a dovetail in the back to use it. One of these days I'll perfect it. There are minor problems with the sliding mechanism. You put it on the wall and it snaps into a dovetail hole in the rear of the wall hanging or platter. I really do need to spend some time working on it. Since it fits in a circular dovetail opening you can rotate the platter anyway to level it or change the angle and it won't come off the wall in an earthquake unless you want to remove it.

Re: PlateHolder

#3

Re:john L PlateHolder

Mike Potts

John, will it do a free standing for table also? if so I'd like to see a picture of it if you have time.

thanks

Mike

Re: PlateHolder

#4

Won't do free standing

John Lucas

although I suppose you could build a stand for it. Just got back from a bike ride. I'll take a photo of my prototype later today.

Re: PlateHolder

#5

barry rockwell

Re:john L PlateHolder

Barry Rockwell

Mike, here are a couple I've seen that are pretty attractive. Maybe they'll give you some ideas.

Re: PlateHolder

#6

Thanks Barry

Mike Potts

Shouldn't be to hard to make

thanks

Mike