Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Turning help needed

Posts

Turning help needed

#1

Turning help needed

Paul Woolson

Hello all. I'm not a turner (thus the reason for my post). My sister hit me with an idea last weekend to do something with a VERY old table that has been in our family for generations. It is finally to the point of no repair so she wants to do something with it for all of the cousins in our family. I'm making some cutting boards from the top but she had the idea of making some rolling pins from the legs. Sounds great...

But the kicker is that I only have a very small metal lathe. Would anyone be interested in helping a fella out and turning some legs into some cylinders? If so, please drop me a note: paul (at) woolsonsoundcraft (dot) com.

Thanks!

Re: Turning help needed

#2

Location? Re: Turning help needed

Henry W

Paul - clearly, knowing your location would be helpful. I would be willing to help out here, despite my lack of "real spindle turning" experience. But I have no idea where you are. A local turner would be the best 'solution.' Please advise.

Henry (Raleigh NC)

Re: Turning help needed

#3

barry rockwell

Re: Turning help needed

Barry Rockwell

Paul,

Very nice website. I have a good friend who is also a luthier - Lennis Laviolette.

Try www.badgerwoodturners.org for the woodturning club in Madison, Wisconsin. I'm sure one of them would be happy to help.

Re: Turning help needed

#4

Re: Location? Re: Turning help needed

Paul Woolson

Hi Henry,

Sorry I neglected to post my location. I'm in Madison, WI. I've got a couple of "feelers" out for local fellas to tackle this but no bites yet.

If it doesn't turn (pun) into something, I'd be happy to ship the legs.