Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Linseed oil

Posts

Linseed oil

#1

Linseed oil

tomd

Just got a Raffan Tape I hadn't seen for 6.50 delivered, off Amazon. Remember he used to finish pretty much everything with salad or mineral oil, and wax, now seems to prefer linseed oil. Used it myself over the years, regularly complimented for high shine, but not fast dry or low odor. Anyone know his thinking on this.

Re: Linseed oil

#2

Re: Linseed oil

Bill Jacksonville, NC

I would never use raw linseed or boiled linseed oil as a final finish. Both darken wood, drying times iffy, and cannot get a buildup of finish on wood. I would not use either LO or BLO under a film finish for same reasons already mentioned.

Raffan, turning, teaching, and prolific writer his forte finishing has never been one of his one of his strong points. Have no idea if he is now using a wiping varnish (oil-resin mix) many use thinned film finish with a solvent and call it a wiping varnish, or oil varnish (resin, oil, solvent) these days.

If getting a build or sheen with whatever he is using today guessing a commercial product. Many turners are going to walnut oil wax products these days for ease of application and health reasons (going green).

Re: Linseed oil

#3

Keith Tompkins

Re: Linseed oil

Keith Tompkins

I agree with Bill. Raw linseed oil is a nasty finish, eventually turning nearly black in color. I use blo or tung oil, mixed with a bit of polyurethane or varnish, applied then wiped dry to the touch. Many coats done this way will leave a perfect finish that's easily repairable. A thick coat of oil finish simply left to dry often leaves a sticky mess.

Re: Linseed oil

#4

Re: Linseed oil

tomd

That is sorta what I think also, about his finish methods, and linseed, though it can be a very good finish, but it takes months or years, the exception being stuff like gunstocks for guns that cost what cars do.

I don't think he is using a whipping varnish. The weird thing is that I have one of his art pieces, that I think is finished just as he says he finishes stuff, and it looks pretty good 20 years later. Got it at a seminar, so I saw him apply his oil and wax finish. Just weird.

Re: Linseed oil

#5

jim miles

Re: Linseed oil

Jim Miles

I used to put Linseed oil on almost everything during sanding at about 100 grit. It does a great job of filling pores & small cracks. Used spray can lacquer over it, worked fine. Now use water base poly on everything. Plain water sprayed on most wood will do about as well to bind the saw dust & fill cracks & pores.