Teaching a turner
Mike Stafford
I met this guy who lives about 20 miles from me who bought an amazing accumulation of turning stuff. He bought a like new PM 3520, over 90 turning tools, 10 chucks with more than 30 jaw sets, a hollowing rig, a slow speed grinder on a pedestal with all the Wolverine attachments, hundreds of pen and stopper kits and Lord knows what else. We haven't been able to unpack everything yet because he has been so eager to turn.
So far we have had 3 lessons. Started out learning to round up 2X2 pine and cut beads and coves with the various tools. He took to the skew like he had been doing it his entire life. From there he made bumpy sticks and then some candlesticks. He turned some oak and walnut from his "barn" full of wood. He has many thousands of board feet of oak, walnut, cherry, poplar etc. in thicknesses to 16/4 in his barn. He used to be a custom staircase installer and went all over the country installing very high end staircases. When he didn't have work he built cabinets from all of that wood in his barn.
On top of that he has many, many barrels of cut offs from newel posts, balusters etc. from his staircase work in dimensions from 2X2 up to 6X6 or larger in all kinds of hardwoods.
He set up his turning studio in his "shed". He has cabinets nicer than in my house that he salvaged from kitchen jobs in his work area. He only had some incandescents in the ceiling but has added lights, a dust collector and installed a whole house fan for ventilation. He said he will air condition it soon.
Lessons two and three were on bowls and hollowing simple items such as boxes.
I have been having a blast.
.... getting paid, or just mentoring for fun?



