Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

mirror gluing jig

Posts

mirror gluing jig

#1

mirror gluing jig

John Lucas

What I call my fan mirrors have always been an incredibly difficult thing to glue up. What you basically have is a whole bunch of wedge shaped pieces. So when you put glue on and make it slippery all the pieces want to go every which way.

The veneer also acts like a spring which compounds the problem. What I did today was to prebend the veneer to match the shape of each section. I did this using curling iron and heat bent it. This made the whole thing fit together without the spring action pushing it apart.

Then I built this jig to push on each section. it's just angle iron welded together and tapped for the socket head screws. It worked even better than I hoped. Before snugging it up very far I was able to push the veneer down towards the bottom. Then when I cranked each screw it pushed the wedges down toward the bottom It was very easy and quite satisfying. Now all I have to do is turn the mirror.


Re: mirror gluing jig

#2

That looks great.

GaryG in MD

Your fan mirror may well be my favorite, and it's nice to see you've worked out a tool to make them a LOT easier to set up. Good thinking! ...GG

Re: mirror gluing jig

#3

Re: mirror gluing jig

Philip F Duffy

Well Done, John!! P.

Re: mirror gluing jig

#4

Re: mirror gluing jig

Randy gleckler

Hey John, Great looking jig. I had made something similar to this years back when I was gluing up some pen blanks. 1 other thing I did was take some shorter pieces of angle iron and use that to press the bolts into so they didn't indent the wood, as I had less scrap to deal with. Nice work sir, as always.

Re: mirror gluing jig

#5

Re: mirror gluing jig

John Lucas

I made it large enough to handle some wood or metal to prevent dents if necessary but in this one it doesn't matter.

Re: mirror gluing jig

#6

Wow!  neat idea!

Tony - Memphis

Nice work!

Re: mirror gluing jig

#7

Re: mirror gluing jig

Craig Daymon

And here you thought you'd never find any "additional" uses for your medieval torture devices. OK, so the comfy cushions weren't a challenge either. :)

Re: mirror gluing jig

#8

The mirror is finished

John Lucas


Re: mirror gluing jig

#9

Re: The mirror is finished

Craig Daymon

Looks great.

Don't know how you could accomplish it, but when I look at the pattern, I'm seeing a fireworks fountain. Wonder if there is a way to embellish the design to more directly resemble fireworks?

This mirror reflects well on your skills. Great work.

(More corny phrases available upon request.)

Re: mirror gluing jig

#10

Re: The mirror is finished

Steve Criscenzo

Well done John. The form and figure work great. It is one of those pieces where folks will wonder "How did he do that?"

Steve