Success With the Hunter Tool
Steve Criscenzo
Several weeks ago I posted about the great personalized service I received from Mike Hunter when ordering a couple of his tools. I purchased the tools because I came into a large amount of pecan last fall. Much of the wood was crotch wood with great figure but I was having a hard time getting the finish I wanted. I was warned last fall about how hard pecan was when dried. The hard dense wood combined with the complicate grain due to the crotch wood was giving me fits trying to finish turn the dried pieces.
To finish turn the bowls, I did the final shaping on the dried blanks with my Thompson bowl gouge, resharpned and took a shear scraping pass with the gouge but still had some tear out. I then took a final bevel rubbing cut with the Hunter #5. Once I got the hang of the tool, the finish cut was very smooth with almost no tear out which made for very easy sanding and finishing.
Several of the larger pieces has considerable movement when drying so I did not have a lot of thickness to work with so I could not afford a catch. I found using the Hunter tool different than a gouge so I practiced on some less important pieces (and I watched John Lucas' video many times). Once I got the hang of it and relaxed a bit it worked great.
Here are a couple of pictures of some finished work. The first photo is a shallow platter about 18" in diameter and 2" deep. The second photo is a bowl with a turned-in top to highlight the heartwood. The bowl is about 13" x 5". Both are finished with GF Seal a Cell and then buffed. (Sorry about the shadows - still working on the photography.)
The pecan is certainly a hard dense wood but the figure is very nice. I have several more large pieces nearly done and will post more when completed.
Comments Welcome
Steve







