Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Exploring Pedestal forms -walnut

Posts

Exploring Pedestal forms -walnut

#1

Exploring Pedestal forms -walnut

Roger Chandler

This is 8" tall and 7-1/8" diameter at the rim. This is an end grain turning from a log and the pith is off centered a bit.......that dictated that I could not get the pedestal quite as thin as I originally planned, but proportionately, it is okay, I think!

Pedestal forms intrigue me a bit, and I am exploring different shapes on different style forms, just in case anyone was wondering why I have posted a few lately!

Re: Exploring Pedestal forms -walnut

#2

Very nice; I'm glad to see you doing this

GaryG in MD

That's a nice form, and well done.

I think we need to see more of this kind of thing.

I'm not sure why we don't.

Maybe this will be the impetus to get some others thinking about it.

The classic form is a "compote".

I made a "footed candy dish" in walnut many years ago, and I've always liked it.

Why I never made another one, I'm not sure.

This is a good way to use a crotch with a shallow feather pattern in it. ...GG

Re: Exploring Pedestal forms -walnut

#3

Re: Exploring Pedestal forms -walnut

John lucas

Funny you should post this. I was just looking through a magazine showing room decorating ideas and of course I always look for turned items. There was an end table that looked kind of like what yours would look like if you turned it upside down and the. Added yours to the top. I commented to my girl friend how hard it would be to hollow both sides.

Yours is much better than theirs by the way. Excellent job.

Re: Exploring Pedestal forms -walnut

#4

Re: Exploring Pedestal forms -walnut

Barry Irby

That is very nice and well executed. I like it but I worry a bit about the foot. If the rim of the foot is too thin I would be worried it might break or crack if it is set down too hard.

What do you think, does it seem sturdy too you?

Re: Exploring Pedestal forms -walnut

#5

Re: Exploring Pedestal forms -walnut

Roger Chandler

This one is plenty sturdy.........thanks!

Re: Exploring Pedestal forms -walnut

#6

Re: Exploring Pedestal forms -walnut

Roger Chandler

Thanks John........appreciate your comments!

Re: Exploring Pedestal forms -walnut

#7

Re: Very nice; I'm glad to see you doing this

Roger Chandler

Perhaps Gary, most turners just fell into the utilitarian bowl concept and have not moved in other directions..........I like pedestals on some forms.......seems to add a dimension of visual interest and sophistication at times as well!

Thanks!

Re: Exploring Pedestal forms -walnut

#8

Barry,

GaryG in MD

I suspect it's the camera angle that is fooling you.

It appears to me that the base is actually nicely convex. ...GG

Re: Exploring Pedestal forms -walnut

#9

Re: Exploring Pedestal forms -walnut

Barry Irby

I think you are right, but I was just expressing my concern. That part is short grain because this is turned with the pith vertical. (what's the term? long grain?)

My friend sells stuff on Ebay and Craig's List. Recently had a Mortar and Pestle that looked like a really poor imitation of what Roger is doing. It was old but appeared unused and may have been made to sell to the tourist trade. The foot on that was much thicker than Roger's foot and it had crack in it. In fact it would not have taken much to dislodge the piece.

Turning with the pith in the center means the foot is Juvenile Wood and has very different characteristics to the rest of the log. The hardwood industry generally avoid the juvenile wood by "boxing the heart" when they saw and grading out the juvenile wood. (often sold as dunnage or railroad ties)

Re: Exploring Pedestal forms -walnut

#10

A Suggestion for Roger.....

Barry Irby

I have not made a form like this as large as this, but I made a Chaless (SP?) and lots of wine glass shapes.

If the foot warps the thing becomes quit tippy. If the stem warps it leans over. Even if your wood is dry you may find it warping a bit after turning because you have exposed parts that were not thoroughly dry or you have relieved some internal stress.

What I did on some of mine was to undercut the base and leave it resting on the rim. Then I cut away part of the rim to leave it sitting on three feet. (three points establish a plane.) I used a straight bit in a router table and the feet were only about an 1/8" high.

You could also leave enough material that you could put it back on the lathe later if necessary. In effect, twice turning it.

Re: Exploring Pedestal forms -walnut

#11

Re: A Suggestion for Roger.....

Roger Chndler

Barry........What you said is a given! I have turned many goblet and other pedestal forms over the years....not my first time to the rodeo..........this piece has more wood in the base than perhaps one would think........it is concave on the bottom, resting on a 3/16ths ring on the rim area.

Thanks for your input.........appreciated!

Re: Exploring Pedestal forms -walnut

#12

Allan W

Re: Exploring Pedestal forms -walnut

Allan W

Very nice. I have a couple of pieces of maple that I might try this on. Thanks for the idea.

Re: Exploring Pedestal forms -walnut

#13

All true!