Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Big Tree Tools

Posts

Big Tree Tools

#1

Big Tree Tools

bowlman

Does anybody know how to contact these people? When I try to go to their website (bigtreetools.com) I get a message to the effect that you can't contact them because they have exceeded their bandwidth. They have a 4 ptong drive center that a friend of mine is interested in and he can't get them either. So, maybe someone out their knows?

Re: Big Tree Tools

#2

Allan W

Re: Big Tree Tools

Allan W

Here is there address and phone #.

BIG TREE TOOLS, LLC

888-887-6464

258 Breezy Hill Road

Wilmot, New Hampshire, USA 03287

http://www.bigtreetools.com/

Re: Big Tree Tools

#3

Brad Vietje

Re: Big Tree Tools

Brad Vietje

Big Tree Tools is the company run by Jon Siegel, an absolute master spindle turner and great teacher. For a number of years he also manufactured very nice sanding belt sharpening systems, spindle steadies, etc...

I suggest you try giving him a call -- he may not even be aware of the technical issue. He's a gem of a guy, and I'm sure he'll do what he can to help you.

Safe spinning,

Brad Vietje

Newbury, VT

Re: Big Tree Tools

#4

Re: Big Tree Tools

Mark Trenier

According to this article, http://www.woodworkingnetwork.com/wood-market-trends/woodworking-industry-trends-press-releases/Rikon-Launches-New-Badger-Safety-Spur-Center-256728861.html#sthash.LiEotc3l.dpbs, the Badger Safety Center is distributed through Rikon Tools. I did a quick search on their website and nothing turned up. Woodcraft is a Rikon Distributor so you might try there.

Re: Big Tree Tools

#5

Re: Big Tree Tools

bowlman

Thanks everybody. Jon did email me back. I am now the owner of a badger. Will let you know how it works out.

For my wooden balls-spheres, I often start with a spindle, knock the corners off, turn a tenon at the tailstock end, reverse it into a 4 jaw chuck, and then a new tenon is turned on the tailstock end (a wee small 1/4 inch tenon) and then I begin making as many spheres as I can get from the spindle-cylinder.