Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Black Oak

Posts

Black Oak

#1

Black Oak

Dick Hnes

A storm broke off a large piece of a black oak tree. I don' t turn much oak. I know someone here has. Is it worth messing with?

Re: Black Oak

#2

Steven Antonucci

I've seen it...and it can be nice

steven antonucci

no personal experience, but I saw some nice pieces in a gallery in California.

S

Re: Black Oak

#3

Re: Black Oak

Jorge

Never turned black oak, but have turned, pin oak, white oak, live oak and red oak. They all slice nicely, Live and white are harder than pin and red, all of them make black stains to whatever metal they touch. I try to stay away from turning oak.

Re: Black Oak

#4

Jim Barbour

Re: Black Oak

Jim Barbour

I have turned quite a bit of all types of oak. The university where I teach is named "Oak University" (in Hebrew so it comes out Elon) and, as a result, I turn a bit for the campus, from trees that grew there. I always let it dry completely before turning, but I am mostly doing spindle work. My favorite is white oak as it gives the best finish off the tool and is most forgiving of both laser engraving and dyeing. It has it's quirks - tools must be razor sharp and touched up often, your touch on the tool must be light,etc. All the stuff you learned years ago and don't need quite so much if you are turning difficult but rewarding.g green or tight grain. It is fun to turn in an odd sort of way. Enjoy it.

Re: Black Oak

#5

Re: Black Oak

Bruce Pratt

I turn lots of red oak, green to final, turns quite well. Often will finish with black dye and white liming wax.