Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Best use of wood-Yield

Posts

Best use of wood-Yield

#1

Best use of wood-Yield

ron bauer

Here are a couple photos of the final yield of the black walnut crotch. Thanks to all the great advice I think things turned out very well. With the cores and partings I was able to get 11 bowls, most of which have some nice figure. The two largest are 12.75" & 11.5" and the rest are in the 7" - 9" range. Since thay are still drying I have not finished them yet but a spray of water to pop the grain indicates they will be real nice.



This is the largest.



This is the other half of the largest.

I know I only show ten but I found a small core after shooting the picture.

I even started to use glue blocks on face plates with these!!

Once again thanks to all.

Ron.

Re: Best use of wood-Yield

#2

Spectacular!

GaryG in MD

Man, you really did great with those.

You got everything available out of that great piece of wood. ...GG

Re: Best use of wood-Yield

#3

Re: Best use of wood-Yield

John Lucas

Very well done. No let me say, extremely well done. It would be a benefit to all who have this option to see how you actually did the cutting to get that many out of one crotch. I don't get crotch wood of that size, usually much smaller and using my older techniques would only get about 2 out of them. that was before I had the coring system however so I might change that now. If you have time could you make a quick sketch to show how it was done. I think everyone would really appreciate it.

Re: Best use of wood-Yield

#4

Re: Best use of wood-Yield

ron bauer

John, Thanks. I am leaving for the weekend. I will try to put something together early next week. Ron.

Re: Best use of wood-Yield

#5

Thanks- I'll go looking for a crotch   

Re: Best use of wood-Yield

#6

Re: Best use of wood-Yield

Randy Gleckler

Wow, those are amazing, very very nice work.

Re: Best use of wood-Yield

#7

Re: Best use of wood-Yield

phillip Medghalchi

I do ask for the sketch also, you did a great job and your thinking and waiting wure paid off, Look forward to your sketch or instruction. Thanks for sharing.