Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

hack a vaping e-cig to pyro pen?

Posts

hack a vaping e-cig to pyro pen?

#1

hack a vaping e-cig to pyro pen?

charlie belden

You may have seen, or maybe used, an "e-cigarette". You've got batteries, a heating coil, a iiquid to vaporize when it comes in contact with a hot coil and a wick to deliver liquid to the hot coil. Some units let you vary the voltage to the heating coil, say from 3.3V to 4.8V. Press a button, make some "smoke" - have a toke. There are models that let you make your own heating coil(s) and some have multiple heating coils.

So I'm thiking

- rechargeable batttery power

- nichrome heating wire

- on/off button

- VERY hot wire

:

:

small, light, cordless pyro pen

that you can make your own pyro tips for.

Hmmmmmmm . . .

Re: hack a vaping e-cig to pyro pen?

#2

Go for it Charlie


Re: hack a vaping e-cig to pyro pen?

#3

Re: hack a vaping e-cig to pyro pen?

phillip Medghalchi

Charlie,

it sounds like wheels are turning in your head. it may be that you are unto a less expensive way of making Pyro pen?

Re: hack a vaping e-cig to pyro pen?

#4

Re: hack a vaping e-cig to pyro pen?

charlie belden

Well the rechargeable battery unit (Vision Spinner) is 4 1/2" long, 1 1/4" in diameter, weighing 2 1/2 ounces (72.5 gms), can, by turning the base of the unit, vary the voltage from 3.3V to 4.8V. It's rated at 1300 mAhr. The unit sells for about $36 USD(online for $25). The charger for it goes for another $10 USD. Recharges from almost dead to full charge in about 4 hours. Heating wire is about $3.50 / 3 feet. Won't do as a Priddle wood vaporizor or brander, but for pyroed drawn work it might be a useful tool.

Not all that nterested in pen pyroing since I have access to a laser engraver - but I'll play with this idea some more. Will report back any interesting findings.

Re: hack a vaping e-cig to pyro pen?

#5

Don Leydens

Re: hack a vaping e-cig to pyro pen?

Don Leydens

I'd love to hear some more about this, Charlie. I quit smoking a while back and have several e-cigs hanging around. Maybe I won't have to throw them out after all! I'll sure be interested in what you come up with. I think the idea is very cool (I mean HOT).

Re: hack a vaping e-cig to pyro pen?

#6

Brad Vietje

Create a Corded Version?

Brad Vietje

Charlie,

Seems to me that generating enough heat to burn wood efficiently would use quite a few watts, and kill the batteries pretty quickly. Have you considered a low voltage DC "power supply" -- possibly a standard AC to DC charging unit for some sort of battery powered gizmo -- and giving yourself the option of longer work periods and maybe eliminating the rechargeable batteries?

Just a thought to try to extend your good idea.

Safe spinning,

Brad Vietje

Newbury, VT

Re: hack a vaping e-cig to pyro pen?

#7

Have RazerTip - Want Cordless

charlie belden

I've got a RazerTip set up with a half dozen "pens" and the sytem works well. But you're tied to a wall outlet and an electrical cord off the back of the "pen". At craft shows, an elecrical outlet often isn't available. Most of the e-cigarettes can be rechardged from a USB cord and a cigarette lighter power source. If you parked close to your booth you can leave a battery charging in your car.

While a portable pyro pen that uses rechargeable batteries won't vaporize wood like Priddle's battery charger Shock and Awe set up, and wouldn't let you pyro larger surfaces, it might work when doing smaller stuff and working in shorter periods of time. I think it could be an Attractor at a craft show - folks are drawn to someone DOING something rather than sitting in a booth surrounded by stuff. Could be a sales feature - personalize a piece by pyroing "created for (person's name)" or whatever else the customer wants on the bottom of the piece.

Re: hack a vaping e-cig to pyro pen?

#8

Easier than I thought

charlie belden

Yesterday I made a trip to a Vape store that spepcializes in "mods" (modifications to stock stuff). There are Cloud Contests "vape people" have similar to Burn Out Contests bikers and car phreaks have to see who can make the largest cloud of burning rubber smoke.

Anyway, turns out there are several "heating coil wire" terminal attachements available and they also had the heating wire - but none larger than 24 gauge - for a buck a foot.

Here's the set up


and here's a detail shot of the heating wire terminal attachement


The battery power source has a 10 minute limiting switch on it. After 10 minutes of being on it automatically turns itself off for 5 minutes to protect the batteries.

I tried it on some wood with a simple bent heating wire and it will burn wood. Haven't used it long enough to get a feel for how long you can burn before the battery needs recharging. Will report back when I've played with this thing some more.

Re: hack a vaping e-cig to pyro pen?

#9

actually 3/4" diameter not 1 1/4"