Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

*** SURVEY: THE IDES OF MAY ***

Posts

*** SURVEY: THE IDES OF MAY ***

#1

Ellis Walentine

*** SURVEY: THE IDES OF MAY ***

Ellis Walentine

WoodCentral veterans know that every two months I pose a pithy question to plumb the depths of this community's collective wisdom and experience on issues of relevance if not importance to woodworkers. We stir your replies into a rich stew, mercilessly edited, that appears magically in the next issue of Woodworker West, the venerable West-Coast journal of woodworking primarily in the West, which is why a lot of our Eastern pals aren't familiar with it.

This month, I've decided to take on a topic dear to my heart -- I'll call it the "Zone" -- that I was recently reminded of by my friend Peter Korn's new book Why We Make Things And Why It Matters, though the Zone per se is not the central theme of Peter's book. I'd characterize the Zone as that coveted state of almost suspended animation, when all your cylinders are firing, when the world around you becomes just a blurry background, and you're so immersed in your work that hours slip away and your woodworking efficiency and enjoyment are at their peak. Whatever your motivations or expectations might have been, when you're in the Zone, the work is all that you are aware of. Those of you who have been around this block know what I'm talking about.

Speaking from my personal experience, I found, probably 40 years ago, that this Zone isn't something you just flip on and off like a switch, but rather more like some kind of reaction that depends on a critical mass of involvement, which only develops, for me at least, after a certain amount of time and immersion in your work, sometimes several hours. It's difficult to reach this critical mass when your shop sessions are brief or intermittent, or when your brain is overloaded with competing thoughts and concerns. But, when you get there -- cue the eerie music -- it's like pure woodworking bliss. I suspect that a lot of woodworkers, whether or not they're conscious of this flow, are addicted to it.

So, tell me what you think. Have you been there? Did you have any tricks to get there? Did you experience it in terms like I described, or how did/does it differ for you? Is it an illusion or do you really work as efficiently as it seems?

Sorry for the nosebleed. I'll look forward to your replies.

Ellis

Re: *** SURVEY: THE IDES OF MAY ***

#2

Re: *** SURVEY: THE IDES OF MAY ***

Don Orr

I think I know what you mean. Some days everything just seems to "click" and go well and smoothly. I seem to have no control over this occurrence however. It just seems to happen once in a while. Mostly I struggle to control what is happening in my shop. Sometime the opposite also happens where everything I touch falls from my hands or gets messed up in some way. It's these times that I feel it is important to recognize that it is not a good day to work with sharp or power tools. I usually just clean up, organize, and think about other projects.

A few months ago I had a bit of the "Zone" or "Zen" while working on a couple of new turnings that involved a good deal of carving-which I don't often do. The 2nd vessel just came out really nicely and where I left the ring of wood to carve out some lugs was perfectly located. The wood was still moist and carved easily with a tool I had bought 2nd hand and never used until needed for the "right" job and it worked very well. I then worked on down to smaller carving tools and scraping and sanding and before I knew it several hours had passed and the piece was looking really good. I don't often have that kind of attention span but things were going well and I just kept working without realizing the time was passing by. The vessel came out very nice and I even got an "Honorable Mention" ribbon at our local woodworking/woodturning show. Upon reflection while reading this question for the "Ides" I realize that this recent project seems to fall into the "Zone" for me at least. One of those time where everything just flowed smoothly from start to finish. A rare thing for me.

Re: *** SURVEY: THE IDES OF MAY ***

#3

Steven Antonucci

in production mode, sometimes

steven antonucci

If I am in "production mode", i.e. making multiples of something like bowls or tops, I can get to an autopilot state. Most of my 50mm tenons end up 51mm. Wood is flying. every step is automatic.

If I stop for a bit and move onto something else, I can still muddle through things and end in a good spot, but only because I know how to fix things. 50mm becomes 58mm, curves get flats...

One thing I notice is that I stop noticing my iPod? When I am in the zone, I don't even realize what song is playing. I don't hear it. Used to happen on the road bike too. I would look up and have no idea where I was, as I was pedaling in an endorphin loving high and miles could pass. No headphones on the bike, though.

S

Re: *** SURVEY: THE IDES OF MAY ***

#4

When the Skew is Honed to a Mirror

Mark Mandell - Gone Round In New Jersey

and the Dogwood is the perfect consistency so that the angle hair drifts off the edge with the faintest hiss to float down and frost the horizontal surfaces around me in pink lacework, it's all too easy to forget what I had intended to make. The Zen takes possession, space-time moves into the background, and what started out as a jar becomes a magic wand.

Nothing is lost. Everything is gained.

Zoned.

Re: *** SURVEY: THE IDES OF MAY ***

#5

My friend the Skew

Geoff Whaling

A turner after my own heart. The sweet hiss of a well sharpend & honed skew effortlessly slicing through grain.

I have had many days production turning my "eco" & other spinning tops when I have easily transcended into the "Zone". Not so easy or often doing other turning tasks as a hobbyist turner as I don't get into the full swing of things to elevate to that higher plane.

A Zone experience usually starts off as a deliberate skills challenge to do 20 tops with the 3/8" spindle detail gouge, 20 with the 1/2" skew the 20 with the 3/4" skew etc from blanks consisting of a 1/2" plantation grown Tasmanian oak spindle through a disk of Radiata pine. No sandpaper allowed! Normally I do up to 20 per hour when I'm going OK.

After 4 or 5 hours turning some days I have taken a tally to see 150 to 200 or more tops sitting there nice and glossy straight off the tool.

Some days a diamond some days are cr@p! When the wheels fall off I have the luxury of walking away, but when the zen moments happen they are way to short - no matter how long they were in "real time".

Come to think of it - these days don't happen by accident as a fair bit of preparation of blanks, tools, mind and body went into them before the day.

Re: *** SURVEY: THE IDES OF MAY ***

#6

Re: *** SURVEY: THE IDES OF MAY ***

mjonesrdg

Yes, I know the mental state...."the zone"...that place where nothing else exists but that which absorbs my full attention. If I were to purposefully and intentionally attempt to "get there", I would hollow the inside of a translucent specie to thin extremes, in a dark shop, back-lit only by a single low wattage bulb.

The zone comes, I think, with deep and undivided attention. With focus and concentration. That state is often accompanied by a background rhythm, as with the sound of tool to spinning wood.

I will find myself in similar zones while concentrating on the drift of a dry fly along the current of trout stream or river, or focused attention in search of agates in a small swath of sand with the sound of surf in the background.

I am neither particularly efficient nor productive in "the zone", but being there for a while is good therapy and pleasantly refreshing. I think that it would be addictive if it were more predictable.

Re: *** SURVEY: THE IDES OF MAY ***

#7

Lyle Jamieson

Re: *** SURVEY: THE IDES OF MAY ***

Lyle Jamieson

I think most of us get there in lathe work. Some, if for only a short time, when the instant gratification kicks in from nailing a nice line of perfect curve.

My shop, to an outsider looks pretty messy. I don't clean the floor often, but kick the shavings under or behind the lathe, til I shovel the piles another day. I don't sweep much and almost never vacuum. BUT, there is a place for everything and everything in its place. What breaks my zone is when things get cluttered up a bit. I get distracted when I can not find where I put "it" last, or I have to move one thing in order to put something else there. I find if I organize my work area before I start a project I am more likely to find the zone and stay in it longer.