Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Triton charger

Posts

Triton charger

#1

Triton charger

Wayne Leach - NW Ontario

Hi All,

Getting back to turning but my Triton power dust hood will not charge. Found that the charger is not working-it's output is 9volt 500ma

I found a universal charger in my junk that is 9volt but 800ma max! Does anyone think that this will cause any problems??

Thanks for any help

Wayne

Re: Triton charger

#2

Re: Triton charger

Don Evans

Sounds like you are talking about one of those plug in chargers with a cord that comes out of it and the end of the cord has a plug on it?

If this is the case you can use the one you have that is 800mA. What that means is it will output safely .8 amps the one that came with the Triton is .5 amps. As long as the charger has a larger number of capability than the old one it is ok to use it. In the future when you see those number they mean 500 milliamps and 800 milliamps, to convert them to amps just move the period 3 numbers to the left.

HOWEVER, you need to check one very important thing! The plug on the end of the cord MAY be reversed in polarity. If you have a meter you can do it with it. Or there is usually a diagram on these units that tell you which point on the plug is + and which is - THEY MUST BE THE SAME ON BOTH THESE UNITS. look for a diagram on both units that looks something like this -( 0+ or reverse is +( 0- This diagram must be identical on both units before you use the 800 mA one.

Don

Re: Triton charger

#3

Re: Triton charger

Wayne Leach - NW Ontario

Don,

Thanks a bunch for the prompt well described scenario.

It is a universal power supply adjustable from 3volts to 12 volts with 9 volts being selectable @ 800 milliamps. It also has the polarity selector switch so I will make sure its set correctly.

Very helpful info.

Wayne