Wood identification question
Jim Barbour
I am almost embarrassed to ask, but does anyone know what the wood in the antique pepper mill on Packard's site is? It looks a lot like Marblewood, but not quite. Suggestions?
Knowledge You Can Build On — Est. 1998
Wood identification question
Jim Barbour
I am almost embarrassed to ask, but does anyone know what the wood in the antique pepper mill on Packard's site is? It looks a lot like Marblewood, but not quite. Suggestions?
Re: Wood identification question
Ellis Walentine
Zebrano?
Re: Wood identification question
Jim Barbour
Thanks Ellis; good idea. The stripes seem not close enough for zebrano and seem too regular for marblewood. I have a commission to make one with the same appearance so I really do need to find something very similar.
Re: Wood identification question
John Veerkamp
Possibly Goncalo Alves aka tiger wood
Another vote for Zebra wood(Zebrano)
Re: Wood identification question
Emmett Manley, Lakeland, TN
I made one of these little pepper mills and it works very well. The size of the pepper grounds really can be adjusted.
Re: Wood identification question
Barry Elder
Just to be different, how about Bocote?!
Re: Wood identification question
Mike Stafford
My vote is for Morado/Pau ferro/Santos Rosewood/Bolivian rosewood which are all the same wood depending on where it is harvested in South America.
It is not a true rosewood, "Machaerium" species of which there are several genera.
I have turned quite a bit of it and I find it wonderful to turn, much like a rosewood but it also has toxicities associated with it I am told. Never had a problem myself but apparently some people cannot get near it.
Here is a picture of a box I turned from a piece. 
Re: Wood identification question
Jim Barbour
That's a nice box, Mike. Thanks for the lead on some new woods (at least for me they are new).
Re: Wood identification question
Matt Overton
that really looks like Olivewood to me
Why not e-mail Brad and ask?
Rob Wallace
There is nothing to be embarrassed about, Jim.
You can see the problem with attempting to put a name to a particular wood sample through recognition. Without much more information, a real identification would be quite difficult.
You certainly could send an e-mail to Brad or give a call to customer service at Packard Woodworks and ask what the wood is that was used for this piece. Brad has lots of experience, is a fellow woodturner, and is a fundamentally great guy; they could hopefully let you know what species that is. They may even have some of that wood in stock? ---> e-mail: sales@packardwoodworks.com Phone: 1-800-683-8876 (M-F, 8:30am-5:00pm Eastern)
I have purchased various items from Packard's for many years, and have always found them knowledgeable and very helpful. (They are also one of Woodcentral's 'major turning sponsors'.)
Good luck with your 'wood quest'.....
Rob Wallace
Re: Why not e-mail Brad and ask?
Jim Barbour
Hi Rob. I called them a while back and found that the picture is a stock photo sent to them by the maker of the mills. They too have no idea what it is, but suggested all the various woods we have mentioned.
I settled on Goncalo Alves as my best guess and have obtained a piece to give it a go.