Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

need to be turning but---

Posts

need to be turning but---

#1

need to be turning but---

John Lucas

I helped out some friends the other day and found out that several of my flat woodworking tools need fine tuning. I move so much equipment around over the last few months that things just got out of adjustment. So I've been spending the days trying to get them all back to 0. Can't stand it when I use a piece of equipment and it doesn't cut perfect. Figure I'll work on my new bandsaw dust collection while I'm at it.

I actually have been working on some new pendant designs. Don't have them down yet. Gotta make a few mirrors as well so maybe I'll have time early next week. My gouges are getting lonely. I did spend some time turning yesterday. 2 friends came over to learn to turn pendants so I got to play with my new ideas a little as well as show them what i normally do.

A good cut analogy came up. I was watching my friend turn and the tool skipped out of the cut. He probably just moved the handle too far and came out of the cut but when he did I saw the tool lunge forward. That's a sign that your pushing on the gouge too hard which leads to cuts that aren't as clean as they usually are. He's ex Army so I asked him if he ever loaded a gun with a blank for teaching and watch the guy flinch before the gun goes off. It's a good teaching skill to watch how smoothly someone presses the trigger. He said he had done that. I told him that's exactly what I saw when he came out of the cut and the gouge skated forward- too much forward pressure- or in the analogy of the gun-anticipating the recoil.

Re: need to be turning but---

#2

Jim Barbour

Nice analogy John; I'll use it ...


Re: need to be turning but---

#3

Re: Nice analogy John; I'll use it ...

phillip Medghalchi

I am not a shooter, but have done that. then learned to back off a little.