Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Owners of Makita UC4030A electric chain saws...

Posts

Owners of Makita UC4030A electric chain saws...

#1

Rob Wallace

Owners of Makita UC4030A electric chain saws...

Rob Wallace

At a garage sale yesterday I bought a brand-new, in the box, never-been-used Makita UC4030A electric chain saw, and have a few questions about this saw for owners if they wouldn't mind sharing some of their experience:

- What replacement chains do you use? - Makita? - Oregon? (S56?) - Other?

- Electric chain saws are notorious "leakers" of bar oil - is this saw any different as to leaking oil, and how much of a problem is this when the saw is stored with oil in it?

- Any advice you have as to use, limitations, maintenance, etc.

This saw is so highly rated by various on-line reviews, that I was confident that buying a $250+ saw in unused condition (the chain and bar were still in their plastic wrappings, and there wasn't a scratch on the saw body) for $125 was probably a good deal! Having this saw to use in the shop for trimming blanks, etc. should be very handy.

Thanks for whatever feedback you can provide!

Rob

Re: Owners of Makita UC4030A electric chain saws...

#2

Lyle Jamieson

Re: Owners of Makita UC4030A electric chain saws..

Lyle Jamieson

I use an electric chain saw A LOT!! I have had a lot of different brands over the years. Almost all of them leak chain oil. So I store them with the oil in it, but I store it on its side so the chain holes that feed it are on top. I find that most fit nicely on/into on its side with the motor down in a 5 gallon plastic bucket to catch any leaks. But they don't leak with the holes up.

Re: Owners of Makita UC4030A electric chain saws...

#3

Re: Owners of Makita UC4030A electric chain saws..

clay foster

We have a Makita 3530A, a slightly smaller version of yours. It's never leaked a drop. Very handy thing to have around the studio and yard. Always starts, no smelly gas or exhaust to deal with, and plenty of power. We've had it about a year, and I wouldn't want to be with out one now. You got a good deal.

Haven't had to buy a chain yet, but any saw shop or http://www.baileysonline.com/ can make a chain to fit.

Re: Owners of Makita UC4030A electric chain saws...

#4

Re: Owners of Makita UC4030A electric chain saws..

robo hippy

I have a Husky, and it does leak around the oil cap. Could be shavings around the gasket. I do store it on it's side so the oil doesn't leak. I have the chain that it came with still on it. Main thing with electric saws is do not push them. Let them cut at their own pace. If it is dull, you have to sharpen, not push harder. You will burn up the motor.

robo hippy

Re: Owners of Makita UC4030A electric chain saws...

#5

Re:  Makita UC4030A electric chain saws..

Darryl

I have a Makita 4000UC, Bailies does have chains for them. Never had any problem with them leaking oil no matter how I have stored it. It has plenty of pep although it does not turn up as fast as my Husky it does a super job. One thing for sure it will not leak gas :) I've gone through a couple of Remington electrics by pushing too hard. Of course the Remington's have plastic drive gears. The Makita has taken a considerable amount of beating with no problems. My wife in particular likes it at 7:00 AM

Re: Owners of Makita UC4030A electric chain saws...

#6

Re:  Makita UC4030A electric chain saws..

Roy Girolami

Take your chain to the chain saw people of your choice and they can get you another. This way you have two chains so you can always have one sharp for use. When you wear both of them out, you should replace the drive sprocket and get two more chains. i have a Milwaukee 6215 that has provided service for over 25 years.

Roy

Re: Owners of Makita UC4030A electric chain saws...

#7

Re: Owners of Makita UC4030A electric chain saws..

Barry Irby

I have gone through several Remington Electrics and a Sears version. My experience with them is that they don't have any sort of pump for the bar oil, they basically leak or pee onto the bar and continue to leak until the oil is gone. (I have not tried turning one sideways or what ever, that might work.) When cutting wet wood, I don't use any oil at all.

I suspect the more expensive saws have a pump or some sort of metering device and are less prone to leak.

Re: Owners of Makita UC4030A electric chain saws...

#8

My Makita UC4000 electric chain saw..

JamieDonaldson

.. has provided excellent service for about 10 yrs. and still has the original chain and 16" bar. The chain appears to be like my Stihl chains, and you made an excellent deal for that price. ;)

Re: Owners of Makita UC4030A electric chain saws...

#9

Re: Owners of Makita UC4030A electric chain saws..

Jorge

Rob,

I like he Husky chains, keep sharp longer than the Oregon.

Re: Owners of Makita UC4030A electric chain saws...

#10

Bill Blasic

Re: Owners of Makita UC4030A electric chain saws..

Bill Blasic

Rob,

I have the The Stihl MSE 220 and the Makita UC4030A and neither of these have ever leaked bar oil. The Stihl takes full sized chains like their gasoline brothers. The Makita use a much thinner chain. Though the Makita will never match the Stihl it is still a very good saw for the money and will do you an admirable job.

Bill

Re: Owners of Makita UC4030A electric chain saws...

#11

Rob Wallace

THANK YOU for all of the comments!!

Rob Wallace

Thanks for all of your replies to my questions. I am happy to hear that the Makita is not a bad "leaker", and that it performs well. I will be giving it a "maiden voyage" through some log sections later today, and will check out its features and performance as a light duty saw. I do have an 18" Stihl 260 Pro that does most of my major cutting, but I am looking forward to having this saw at hand to do shaping and trimming of blanks inside or outside as needed, without the noise or exhaust.

Your comments and advice are much appreciated!

Rob