I came across this video and wanted to share as it may lead to some really cool ideas to salvage cracked bowl blanks (or perhaps embellish perfectly good bowl blanks)!
Seemed to me that the walnut "vine" could have been a little thinner. It came across as a pretty course pattern. Didn't care for the chisel advertisement in there either. But, if they would send me a set of chisels, I would give them a mention as well.
Nice to see a turner thinking outside the bowl, however I thought the presentation of the bowl gouge & other turning tools needs a bit of refinement with his technique.
I am not an expert by any means, but what happened to rubbing the bevel ? All the close up shots I saw made me nervous, as I could see numerous catches if I had tried to cut like he was doing. Or, did I see something that wasn't there?
Like Dick and Jim, I thought his tool presentation stuck out like a sore thumb. I really liked his ideas and also his video techniques, but he is not using those gouges as they should be used!
Notice the scrape/cutting at 8:37, 9:36, 9:42, 10:05 - 10:12.
Carter Tools might want to send someone down to give Frank lessons in presenting the gouges to the wood, and not only would they get a better advertizement, but he'd sand a lot less, too!