Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Collection Plates

Posts

Collection Plates

#1

barry rockwell

Collection Plates

Barry Rockwell

I'd like to turn two collection plates for the local Methodist Church. The last time I was in church I don't think they had discovered wood yet, so I'd appreciate any and all advice I can get. Size? Style? Wood? I don't have a clue so anything would be helpful. Thanks

Re: Collection Plates

#2

Re: Collection Plates

John lucas

Barry I wrote an article for American woodturner on making collection plates about 12 years ago. If yor an AAW member you can look that one up. I'm flying now a d may not have access.

Re: Collection Plates

#3

Re: Collection Plates

RCH

According to the preacher in our local club, they can never be too large, only too small. He recently turned one, and decided when he was finished that it wasn't deep enough.

Re: Collection Plates

#4

Re: Collection Plates

phillip Medghalchi

Barry, I think the key word here is collection, the deeper, and the bigger is better. I don't go to church but the idea make sense, since they all like to collect more money for the pastor.

Re: Collection Plates

#5

barry rockwell

Re: Collection Plates

Barry Rockwell

Thanks John. I couldn't find the one by you, but I found one by Wes Jones in the Fall 2002 issue that was a big help.

Re: Collection Plates

#6

Mike Peace

Re: Collection Plates

Mike Peace

Do you kiln dried wood. I tried to make some of these from green white oak and there was just too much movement and cracking. Much more so than with my typical turned twice bowls from green wood. I would suggest using a glue block to avoid any loss of thickness. I think you need the full two inches to be a good size.