Crepe Myrtle
Bernie Rose
Has anyone turned Crepe Myrtle with success ? The last time I tried to do something with Crepe Myrtle it dried so fast that it checked into firewood. Is it because it it too light weight and porous ?
Knowledge You Can Build On — Est. 1998
Crepe Myrtle
Bernie Rose
Has anyone turned Crepe Myrtle with success ? The last time I tried to do something with Crepe Myrtle it dried so fast that it checked into firewood. Is it because it it too light weight and porous ?
Re: Crepe Myrtle
Steve Kniffen
I saw a demo where a guy turned very thin stemmed goblets. Then as they dried, the stems twisted into interesting shapes. These were decorative, never to be used, but neat to look at. There is one small picture available at: http://www.wntx.org/index.php?option=com_content&view=category&layout=blog&id=11&Itemid=106 . The artist is John Beasley and his bio is directly below the table listing the demonstrations. He also has a handout there on another link.
Steve
Re: Crepe Myrtle
Brad Vietje
Cool! Speckled Alder is another wood with few uses, but it does make nice thin stem, natural-edge goblets.
STEVE: Try some while keeping it damp with a spray bottle/plant mister... could turn out to be a lot of fun. Might need to wet sand with wet/dry paper and a bowl of water to get the best result.
Safe spinning,
Brad Vietje
Newbury, VT
Re: Crepe Myrtle
Bill Jacksonville, NC
I turned end grain crepe mrytle pencil holder. Ran into trouble posting picture but on my projects page.
http://lumberjocks.com/projects/92320
Re: Crepe Myrtle
Dick Hines
I cut down a big crape myrtle for a house addition. I though I was going to get some bowls out of it. It split almost as soon as it hit the ground. I have never seen any wood split so quickly.
I did get a bunch of ornament blanks out what was left though.