Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Hand Sharpening Carbide Inserts

Posts

Hand Sharpening Carbide Inserts

#1

Jim in Burlington Ont.

Hand Sharpening Carbide Inserts

Jim in River Oaks, Ont.

Hi,

Like many of us, I've been using carbide tools now for 6-7 years. The inserts are great but as they wear down I have started to try and use my water stones to resharpen them. Results vary but I have been using 800-1000-4000 wet. Is any one else using a process to recover their carbide insert tips?

Thanks,

Jim

Re: Hand Sharpening Carbide Inserts

#2

Re: Hand Sharpening Carbide Inserts

Mike Brazeau

Jim, the water stones are not hard enough for carbide. Get yourself a credit card sized diamond hone from Woodchuckers and rub the top on it.

Re: Hand Sharpening Carbide Inserts

#3

Re: Hand Sharpening Carbide Inserts

Dick Coers

I saw a technique where the guy screwed the insert on to the end of a wood dowel. He used a screwed sized to be below the top face of the insert. He chucked up the dowel on the lathe, set it for slow, then brought up the diamond hone to the face of the insert. Claimed it only took a minute and was good as new.

Re: Hand Sharpening Carbide Inserts

#4

Re: Hand Sharpening Carbide Inserts

cranskin

Trend has some U Tube videos of the procedure with their diamond sharpener

Re: Hand Sharpening Carbide Inserts

#5

Bill Blasic

Re: Hand Sharpening Carbide Inserts

Bill Blasic

At the symposium in Utah last year talking with James from Trend when someone from the symposium told James that the carbide insert folks wanted him to quit showing how he sharpened the carbide inserts with Trend's diamond sharpening outfit. Does work.

Bill

Re: Hand Sharpening Carbide Inserts

#6

Jim in Burlington Ont.

Re: Hand Sharpening Carbide Inserts

Jim in River Oaks, Ont.

Thanks guys,

I'll look into Trend for some ideas on reusing the tips I have.

Take care,

Jim

Re: Hand Sharpening Carbide Inserts

#7

Re: Hand Sharpening Carbide Inserts

ron bauer

A couple alternatives to the heavy prices some are charging.

http://www.carbidedepot.com/detail.aspx?ID=151057 and

http://eddiecastelin.com/cutters_only.

I use the carbide depot items. The Castelin itmes are a direct replacement for one of the nationally advertised brands. I don't mind companies making a reasonable profit but when the same item is available for 1/3 the price seems like there is a little gouging (no pun intended) going on.

Re: Hand Sharpening Carbide Inserts

#8

Re: Hand Sharpening Carbide Inserts

Don Thur

Hope I am allowed to post this***

Re-replacement carbide cutters: we have them for sale at a very reasonable cost. They can be found at www.knotsburls.com/kilian .

Don Thur

Re: Hand Sharpening Carbide Inserts

#9

Pretty sure you need to pay for an ad


Re: Hand Sharpening Carbide Inserts

#10

Re: Hand Sharpening Carbide Inserts

phillip Medghalchi

her is a link on you tube:

https://www.youtube.com/watch?v=JcB5edQuOXQ