Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

high speed engravers *LINK*

Posts

high speed engravers *LINK*

#1

high speed engravers *LINK*

John Lucas

anybody using these. I saw one this weekend and it looks like an excellent tool. The turner is doing great work with it. I just wanting second opinions.


http://www.sculptingstudio.com/high-speed-carvers/power-carvers.html

Re: high speed engravers *LINK*

#2

Re: high speed engravers

Harvey Meyer in Atlanta

You already know my opinion John. I find it to be a well made tool that has higher speed and more torque than more expensive versions on the market. So far it has pierced 2 hollow forms with out a hiccup. I also find that it pierces with less effort if my wall thickness varies to the thick side (1/8"). Glad you made it home safe and sound:-)

Re: high speed engravers *LINK*

#3

Re: high speed engravers

Dennis Bilevich

Hi John, I use the NSK, They are a alittle more $, but you get what you pay for, it takes the 1/16" bits, you don't use oil,had mine for 8years and is work good and still like new,that's 35lbs pressure, rpm 35000 you should get a good buy when in PHX

Re: high speed engravers *LINK*

#4

Re: high speed engravers

phillip Medghalchi

John, you must have hit an oil well form all those flooding or snow lately. compressor and the tool. about a grand?