Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Lathe Duplicator using router

Posts

Lathe Duplicator using router

#1

Lathe Duplicator using router

Craig Daymon

A little while back someone was looking for a lathe duplicator. Today I ran across a pair of YouTube videos from some young British turner that built himself a duplicator that utilizes a router. Here are the links to the 2 videos on the project. (I believe there are also free downloadable plans to build it avaiable as well.)

http://www.youtube.com/watch?v=p_OHC-uL9HY

http://www.youtube.com/watch?v=mu1jLTN9rRU

They're in order, part 1 then 2.

Re: Lathe Duplicator using router

#2

Re: Lathe Duplicator using router

Marty

Thank You so much. I think I was the one looking for the best possible "duplicator". Someone sugested that I try to do it "freehand". Well after doing 13 so far I have it down somewhat pat. With the help of calipers, and various measuring devices. I have three to go and then comes the hardest part,what to charge the client. It has been a fun ride so far. I did down load the free plans though,"just in case", Marty