Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Bench Grinder

Posts

Bench Grinder

#1

Bench Grinder

phillip Medghalchi

Hello, guys,

I bought wood craft slow speed bench grinder just for my turning tools about a year or two ago. i struggled to understand why I could not get a sharp edge like when my other friends showed me. Finally, this last Sat. I went to a one of the turner's open shop and the main purpose was to learn about sharpening. I told them that I was going to take all my tools including my grinder to figure out what was wrong. to make the long story short. with the help of a master turner we figured out that the problem was the bench grinder itself and so I called the woodcraft and I took it in. they refunded my money, whoever, they don't carry that grinder anymore and the one that they sell now is made by Rikon and they are out of that and don't know when they would get it. On top of that they told me that they can not honor the price I paid for the old grinder for the Rikon. So, here I am and have to buy a new bench grinder,

I looked at 8" variable speed grinders on line and the darn things are about $300+ for Jet and other ones. The craft supplies is out of Scheppach 8" Variable Speed Grinder for 129.00 until may 2,a and I am not sure if Rikon is a good brand or not.

Any suggestions on any of the new Grinders? it also seems like that I have to swallow the idea of spending the money on buying th CBN wheels too. so, they it goes, it seems like I have to give up my lunch money for the next several month to come up with a decent bench grinder with wheels.

any, Ideas, please?

Re: Bench Grinder

#2

Re: Bench Grinder

TomD

I use a 8" slow 1800 rpm Taiwan grinder I paid like 69.95 for way back. I used the green wheels that came with it for a lot of work, but eventually put in the friable ones, of which I have had several.

Variable speed is almost always a good thing, but I don't miss having it on this machine. If I did, I could friction grind some stuff, but for cutting it is OK.

Re: Bench Grinder

#3

Re: Bench Grinder

John lucas

Did you take the wheels off the grinder to see if the shaft was running true. If it is then its either the washers the bushings or the wheels that are the problem and not the grinder. Why would you need a CBN wheel. They are nice but a properly aligned and grinding wheel will do a great job. Narrow the problem down and we can try to help you better.

Re: Bench Grinder

#4

Re: Bench Grinder

John lucas

Did you check with other wood raft stores to see if they have any

Re: Bench Grinder

#5

Bill Blasic

Re: Bench Grinder

Bill Blasic

I had one of my club members who needed a grinder so I sold him my almost new Woodcraft grinder (a good one). Thinking I would be able to pick one up as I had two other grinders. Months went by and no one had any slow speed grinders at a reasonable price (Jet came out with one but way to expensive for use as a common grinder for hands on classes). Then I heard that Rikon was coming out with one which was a tough choice because I had trouble with a couple of Rikon products. Well I needed a grinder so I bought a Rikon as soon as they came out and when I mounted it I found out it was a little narrower than the Woodcraft one it replaced which required moving the system bar holders under it. That accomplished I turned it on and I was really surprised as it ran smooth and true without any adjustments to the wheel. Although it is a little less powerful than the one it replaced it works absolutely fine. Like I stated online if they are all like this one Rikon has a winner. Price $139 which a week later it went on sale for $99 which Woodcraft promptly refunded the $40.

Bill

Re: Bench Grinder

#6

Re: Bench Grinder

Mike Potts

Try going to Amazon, I bought a powertec last Nov. form there. it come with white ox wheels 60 & 120 grit. I did have some problems the wheels in balance but now it runs fine. Southern tool has one for $69.00. the ricon was $139.00.

Re: Bench Grinder

#7

Re: Bench Grinder

bowlman

phillip,

First things first ... get the grinder situation straightened out. You really don't need variable speed. Low speed, high speed, in 30+ years of professional turning I have used them all. Currently I have a low speed grinder.

CBN wheels? You definitely do NOT need to spring big bucks for CBN wheels ... at least not yet. Get a grinder that runs true and steady. Get used to sharpening with the friable wheels, whatever color. Norton is a good quality product.

Save your money for CBN until you are really, REALLY comfortable sharpening with the other wheels. I know many of the elite turners who do NOT use CBN. Must be a reason ... not that theya ren't good wheels, they are, but why spend more money when what you got is just fine? Having CBN wheels will not make you a better turner nor will they give you a "better" edge ... just a lighter wallet.

Re: Bench Grinder

#8

Re: Bench Grinder

phillip Medghalchi

John, the master turner who helped me knew about all that you mentioned and he taught me how to do it next time if I ever have any problems with it again. However, the shaft was the problem as well as the wheels.

Re: Bench Grinder

#9

Re: Bench Grinder

phillip Medghalchi

Bill, that's what they told me they carry now, however, they are out of stock on that and the guy who was helping me said that the store manager told him he would not honor the price I paid for the original woodcraft grinder for replacing it with the Rikon one.

Re: Bench Grinder

#10

Re: Bench Grinder

phillip Medghalchi

Indeed, for now I can not afford it and also, some of the tools I have since, I've gotten them free from my friends ( when their Dad's and spouses') unfortunately, happened to be made of carbon steel and I only own few HSS. So, even if I could afford to fork out the money for CBN, I can not use my tools on them. I am planning to get use to sharpening the ones I've got and gradually when I can afford better made HSS tools then maybe grow into CBN. I already have a Knock off $30 red color grinder which runs (surprisingly) true and quite, but is a high speed and then I also have the 6" DeWalt grinder which again is high speed. I will not have the extra room for another grinder dedicated for CBN and then another one for slow speed. Neither do I have the extra dough. So, for now a slow speed will do, which brings the total to 3 grinders. On the red one I am planing on putting the cardboard wheel for honing and I haven't decided what the other wheel will get on it. Any suggestions?

Re: Bench Grinder

#11

Re: Bench Grinder

John Lucas

I sharpened for years on a high speed grinder and many of my tools were carbon steel. You learn to have a really light touch and keep a can of water handy. I grind one pass, look at the tool and dip it in the water. Then grind again if necessary. In those days I had a gray wheel which really heated up the steel. If you can get a white aluminum oxide wheel it will grind quite a bit cooler but will still overheat the tools very quickly if you grind too long or with too much pressure.

If you do blue the steel you haven't ruined it. that area simply won't hold an edge very long so you'll have to resharpen more often. That's actually a good thing because the more you sharpen the better you get.

I have a 35 year old craftsman high speed grinder that I still use for sharpening some tools. It now has a green wheel for sharpening carbide and hss metal turning tools but occasionally it's just the right wheel for sharpening some of my odd shaped tools.

Re: Bench Grinder

#12

Re: Bench Grinder

bowlman

If you mount a "cardboard honing wheel" on a regular grinder you must find a way to reverse the rotation of the wheel. The honing wheel, any honing wheel, should turn AWAY from the user and the edge, not into it. Same for a leather stropping wheel. I mount a piece of 2 inch thick mdf to a faceplate, turn it round, then apply honing compound to the wheel. Run your lathe in reverse, or, swing the banjo around and hone from the "back" of the lathe if you don't have reverse.