Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

A few rings, and steam-bent coil spring *LINK*

Posts

A few rings, and steam-bent coil spring *LINK*

#1

A few rings, and steam-bent coil spring *LINK*

Keith Newton

Here are the first 3 rings, with about 20 more in the works, and another little project thrown in.

Some time back, Ben Jackson my assistant and I were somewhat bored by the kind of jobs coming our way, so we decided to plan on working late every Wednesday night on fun or challenging projects.

Many years ago, I had a book on steam bending, which had a photo in it of a spring like this that I was really intrigued by, and always wanted to see if I could duplicate it. The book didn't give any details explaining how it was done, or at least the finer points, so it was rewarding to manage to pull it off.

Anytime there is a discussion about steam bending, there will usually be some who argue that the unpredictable spring-back will be a game killer. But that may be an indication of their not having a full grasp of all the possibilities. I was actually hoping for more than I got for my intended use of this part. But that is OK, because it was the first time Ben had been in on steaming, and we both learned a lot in the process, which just inspires taking another step up the ladder.

Here is a link to some pics. I also included some shots of the rings that we finished last week. They aren't totally finished, and there are about 20 more in the works, just partially through the process.

I hope you will try to view these full screen, so you can see the detail better. K


https://www.flickr.com/photos/7391658@N03/sets/72157644095226123/

Re: A few rings, and steam-bent coil spring *LINK*

#2

Re: A few rings, and steam-bent coil spring

Jim H

Keith, great looking rings. I would like to hear more about the process you used to make them.