Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Burning lines on Face Grain

Posts

Burning lines on Face Grain

#1

Burning lines on Face Grain

kruizen

I turned a quick plate to hold the eggs while I took the pictures. I tried burning a couple lines in with a piece of plastic laminate it did not turn out very well. The laminate kind of disintegrates and does not get hot enough to burn the line. What am I doing wrong or how do other people do it?


Re: Burning lines on Face Grain

#2

Re: Burning lines on Face Grain

Dale Gillaspy

Nit sure what you mean by plastic laminate. I know people use formica with success. I have a wedge of ironwood that is down to a point that I hold with a pair if vice-grips.

Re: Burning lines on Face Grain

#3

Re: Burning lines on Face Grain

John Lucas

You need high rpm. I find if I blunt the edge of the plastic it works better. For those who don't know a lot of people, me included use plastic laminate (formica or some other brand) to burn lines in platters. I do find that some don't work as well. can't tell you what I use because I simply picked it up off the floor at work when they were done with our cabinets. :)

Re: Burning lines on Face Grain

#4

Re: Burning lines on Face Grain

Wally Dickerman in Arizona

I burn lines using a reshaped small screwdriver. I used it long before I realized that I was supposed to use plastic or ebony or whatever. :|

Re: Burning lines on Face Grain

#5

Re: Burning lines on Face Grain, Thank You

kruizen

That sounds like a good idea I and sure that there is laying around the house somewhere. Thanks!