Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

setting up a new shop

Posts

setting up a new shop

#1

setting up a new shop

John Lucas

I bought a new table saw yesterday. I already have the lathe. Now need a mini bandsaw and grinder and I'll be in business. My shop will be considerably smaller (think card table) but heating and cooling won't be as much of a problem. Neither will wood storage. Plywood will be 4"x8" sheets so storage of sheet goods won't be a problem either.


Re: setting up a new shop

#2

You will dwarf your tools

Mike Foster

That's pretty funny John. I love that mini boring bar!

Re: setting up a new shop

#3

Re: You will dwarf your tools

John Lucas

Hey Mike it has a light for hollowing. I used to have a hollowed tagua nut on there but used it for something else. I need to do another one.

Re: setting up a new shop

#4

Re: setting up a new shop

Gary clarke

Please do not cut your "little"finger on the saw. :)

Re: setting up a new shop

#5

Re: setting up a new shop

John Lucas

It's an early version of the saw stop. Once it hits the bone it stops. Not enough power. :)

Re: setting up a new shop

#6

Re: setting up a new shop

phillip Medghalchi

You don't think once it hits the bone bad enough John? By then you are in trouble already. Hope you never have any accidents anyways.

Re: setting up a new shop

#7

Re: setting up a new shop

phillip Medghalchi

Is that the $400 Mini table saw for cutting Pen blanks?

Re: setting up a new shop

#8

Re: setting up a new shop

John lucas

Hey ill have to try cutting one. I think 3/4 thick would tax it's abilities The miter gauge definitely needs improvement

Re: setting up a new shop

#9

Alan Zenreich

Re: setting up a new shop

Alan Zenreich

Borrowing Gulliver's tools again?

Re: setting up a new shop

#10

Dick Hines

Re: setting up a new shop

Dick Hines

i bought a mini chop saw that I use to cut brass rods for the handles on my boxes. Micro-Mark sells all kind small tools for model makers.

Re: setting up a new shop

#11

Re: setting up a new shop

Don in Central Illinois

Is that lathe the one you use to turn those tiny goblets?

Re: setting up a new shop

#12

Re: setting up a new shop

John Lucas

Yea I could buy something from every page in the micromark tool catalog. I pulled it out today looking for some micro size Torx screws. No go. Still trying to find those. none in my catalogs and the only source I found online was for quantities of 1000 or more.

Re: setting up a new shop

#13

Re: setting up a new shop

John Lucas

Nope use my powermatic. It has less vibration and at that scale vibration is a problem. My friend (and the one who has turned one smaller than me) uses a Dremel in a custom mount to turn his miniature stuff. Martteen Meerman is an incredible miniaturist.