Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Unfolding a 22 foot band saw blade *LINK*

Posts

Unfolding a 22 foot band saw blade *LINK*

#1

Unfolding a 22 foot band saw blade *LINK*

John Lucas

Go to the 25 minute mark and watch. It scares me to unfold my 152" blades.


https://www.youtube.com/watch?v=aLCtq-P1dLA

Re: Unfolding a 22 foot band saw blade *LINK*

#2

Dick Hines

Re: Unfolding a 22 foot band saw blade

Dick Hines

I take my 105" blades out in the front yard and toss them into the air and run. It works every time.

Re: Unfolding a 22 foot band saw blade *LINK*

#3

Don Leydens

Re: Unfolding a 22 foot band saw blade

Don Leydens

That's the way I do it too, Dick. This guy looks like he's done this a few times before. Interesting video. Thanks for posting, John!

Don

Re: Unfolding a 22 foot band saw blade *LINK*

#4

Steven Antonucci

142"...wearing heavy gloves

steven antonucci

and long sleeves...

and then the toss...

little small blades, don't bother, but 1" ones... dicey!

S

Re: Unfolding a 22 foot band saw blade *LINK*

#5

Harry Robinette

Re: 142"...wearing heavy gloves

Harry Robinette

I'd like to see them recoil that babe back to the size he stated with.SCARY !!!!

Re: Unfolding a 22 foot band saw blade *LINK*

#6

Re: 142"...wearing heavy gloves

John Lucas

the guy who makes my bandsaw blades and sharpens my table saw blades sharpens industrial bandsaw blades. I've watched him fold them up into 2 coils. About the same that guy started with. He makes it look simple.

Re: Unfolding a 22 foot band saw blade *LINK*

#7

Keith Tompkins

Re: 142"...wearing heavy gloves

Keith Tompkins

John, I once worked in a shop that had a boat builder's bandsaw...so big, the lower wheel sat in a deep pocket cast into the floor. The older experienced guys could coil and uncoil the blades with ease...they would stand on the blade, hold it over their heads, and pull down vigorously. Almost like jumping rope. The blade would coil up perfectly. When that big blade broke, it would scare the heck out of me!

Re: Unfolding a 22 foot band saw blade *LINK*

#8

Re: Unfolding a 22 foot band saw blade

phillip Medghalchi

Well, he said he was the fifth generation sawyer, so that gave him the idea to uncoil the blade w/o any gloves and he even held it over his head and I couldn't hear what he was saying. the mic. was messed up. I think those guys never go to the ER?