WD-40
Lyle Jamieson
I thought I would start a new thread cause the one below gets lost in another topic from John L. WD-40 was mentioned on the forum below (sorry for the poor editing on my part down there)and there was a contributor that showed that it is not a good lubricant. W-D-40 equals Water Displacement #40. They tried 39 other different formulas before they got it right. It is an amazing product for turners. It was not designed to be a lubricant. It is the best thing to use on lathes because it retards rust by displacing the water. It also acts as a slight lubricant but it is not oily, it does not produce an oily dust film, it is not slippery. We don't want the tailstock and tool rest banjo to be sliding around on the bed. Some folks pay a lot of money for fancy lubricants, when most of them are counterproductive on lathes.



