Oneway versa mount: any opinion?
Sergio
Hello, I need more face plates. Im considering the Oneway versa mount system http://oneway.ca/index.php?option=co...id=33&Itemid=2
Anybody uses it? Any input will be appreciated.
Knowledge You Can Build On — Est. 1998
Oneway versa mount: any opinion?
Sergio
Hello, I need more face plates. Im considering the Oneway versa mount system http://oneway.ca/index.php?option=co...id=33&Itemid=2
Anybody uses it? Any input will be appreciated.
Re: Oneway versa mount: any opinion?
Bart Leetch
Is this what your talking about?
http://www.oneway.ca/versa-mount/
Here is another system.
http://www.teknatool.com/products/Chuck_Accessories/Teknatool%20Toolbox_Faceplate%20Rings.pdf
Re: Oneway versa mount: any opinion?
Bart Leetch
Here is another less expensive way to do it.
https://www.youtube.com/watch?v=T0Ct_8FoibE&list=UUh48-qjFjHhHCDPuuPZg4VQ
Re: Oneway versa mount: any opinion?
Sergio
Thank you Bart, the rings that are hold by the chuck jaws are made also by Vicmarc and I have them. They are very nice and worked very well for me. I just wanted to try something else, not sure why. Yesterday I received the oneway 4 and 5 inch. They seems OK but...the tree screws that hold the ring to the mount are of a rare type and obviously easy to loose in the wood shavings. So I searched for a supplier. Thy can be found in one inch , 3/4 inch length but not 5/8, the length oneway are. Only a Canadian company sells them, package of 100 for $99! I'll try not to lose the screws.
The machining of the thread is terrible, tons of burs, by the way but fits. I'm very glad I've got a VL 300.