Not a demonstrator but I have had problems
Geoff Whaling
Keith, I agree with John J make their job easy. If I'm carrying wood blanks I always declare and mark with common and scientific names if I can. I had some problems with a Woodcut ER collet handle and the Woodcut replaceable tip gouges in my checkin baggage back into Oz from NZ. Seems security were pretty interested as they were packed between the rods for the extendable bag handle. They had obviously looked at everything but had returned it pretty much how it was. I include a photo or a woodturning magazine in with the tools to show what they are for just in case.
Because I have an implanted medical device I opt for the pat down in the pubilc gallery but there are always customs/security staff who will not follow protocol and want to scan my upper body with the detector wand. The risk to me of the security wand interferring with the device is possible but fairly low. However it is still not a risk I am willing to accept and I don't have to. More poor training or lazy staff I think. On one occasion in Brisbane when an officer forced the issue and I stepped back from the search it created a bit of a fuss. An appology was very forthcomming and I was given full co-opperation to make a formal complaint. Airlines themselves are another story altogether.
I don't make a big issue but will stand my ground and ask for a supervisor if necessary as I know what the consequences of this thing misbehaving is like. Ouch!
When I have had problems I have found a polite but firm letter to the organisation concerned, stating the issue, flight number, date & time and in my case the names of staff if I can get them, has helped "retrain" a few staff at the local airport. The locals are generally well trained now and I make their job easy by being early and prepared.