Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

4,000 year old woodturnings discovered in Eng

Posts

4,000 year old woodturnings discovered in Eng

#1

Rob Wallace

     4,000 year old woodturnings discovered in Eng

Rob Wallace

Tib Shaw posted this link on Facebook which is an on-line article from England's "The Guardian" magazine that reports on the relatively recent discovery of Bronze Age artifacts excavated from a burial site that contained 4,000 year old woodturnings - various jewelry and ear plugs turned from wood, and beads made of other materials such as amber and tin. The artifacts are from the well known archaeological "Dartmoor" site in Devon, from an area of peatland (moors) in the southwest part of England. They were discovered in a box associated with the skeletal remains of what may be a women or teenager, as part of what appears to be the remains from a funeral pyre.

Have a look at the article at: http://www.theguardian.com/science/2014/mar/09/dartmoor-burial-site-bronze-age-history

I would LOVE to see these turned pieces that are 4,000 years old! If only they could find the lathe that turned them!!

I hope you find this as interesting as I do!!

Rob Wallace

Re: 4,000 year old woodturnings discovered in Eng

#2

Alan Sweet

Re:      4,000 year old woodturnings discovered in

Alan Sweet

Rob... that is wild. Lathes 4000 years ago. I read some where the Vikings had lathes that were pedal driven. I wonder what the source of power and drive that ancient English had?

Re: 4,000 year old woodturnings discovered in Eng

#3

Rob Wallace

Re:      4,000 year old woodturnings discovered in

Rob Wallace

Alan:

The Vikings were supposed to have developed pole lathes for larger items (I have never heard of pedal lathes being developed until the 1800's - e.g. the 'Velocipede') - they have uncovered bowl cores which are still fairly well preserved that are associated with Viking settlements. There is no doubt that they used lathes of that kind. Dick Enstad (from the Twin Cities area in Minnesota) also has built and demonstrates a bow lathe to turn smaller items that was also associated with Viking craft. He showed it during the AAW symposium in St. Paul back in 2011.

The amazing thing is that this Dartmoor site has produced turning artifacts that pre-date the Viking-era woodturning by a few thousand years. Perhaps the only older evidence for earliest woodturning goes back to Egyptian/Sumerian times where a bow lathe was apparently being used, perhaps around 5,000 BCE.

Rob

Re: 4,000 year old woodturnings discovered in Eng

#4

Re:      4,000 year old woodturnings discovered in

Ralph Lindberg

Rob

If you mean 'peddle' as in how a bike works, yes 1800s. If you are talking about a treadle lathe (ie continuous rotation) it is certainly older then that, I have seen wood-cuts and prints of treadle lathes going back to the 1500s.

There is some suspicion that the Romans may have had continuous rotation lathes, but no proof that I am aware of. The suspicion comes because they did make helmets for auxiliary troops using metal spinning, which does require continuous rotation.

I also would NOT give the Norse credit for the spring-pole lathe, it predates the Norse by probably at least a thousand years.

I haven't looked, but these items sound like they are small enough to be made with a bow-lathe, rather then anything larger.

The evidence I have seen suggests that the bow-lathe is the first lathe figured out. It may even be directly related to using a bow for fire-starting.

Sometimes we forget that you don't need the "incredible" machines we have today to make incredible turnings. There is an extant oval-turned Ivory box the the "Dresden Green Room" display that dates to the 1500 or 1600s.

Re: 4,000 year old woodturnings discovered in Eng

#5

Rob Wallace

Re:      4,000 year old woodturnings discovered in

Rob Wallace

I agree with you Ralph - I did not say that the Norse invented the pole lathe, only that they developed pole lathes for bowls and items of related size. Pole lathes likely pre-dated the Viking era since there is some evidence of them scattered about Europe, and perhaps the middle east.

There is evidence for continuous rotation lathes in the late 1400s to early 1500s, including Da Vinci's lathe with a fairly large flywheel. These were either crank driven lathes or treadle lathes. I have seen engravings in books dating to the 1600s where there are hand driven flywheel lathes coupled to the lathe itself (drachselbank) in the Netherlands and in Germany. The flywheels were likely cranked by an apprentice while the 'master' did the turning.

The real questions that go beyond the lathe itself involve knowing what kinds of cutting tools were being used to do the turning. Hook tools and various forms of scrapers or skews were probably among the first to be applied to turning. I don't know how much is known about this part of the earliest forms of woodturning.

It is most likely that the earliest lathes were bow lathes (as is shown on the relief drawings on Egyptian tombs); and yes, it would be likely that these 4,000 year old turned pieces were done with a bow lathe. It would be great to find the lathe or components of it as they continue to study the Dartmoor site....

Neat stuff!

Rob

Re: 4,000 year old woodturnings discovered in Eng

#6

Rob Wallace

Article on Viking Woodturning by Alan Lacer

Rob Wallace

An on-line accessible article by Alan Lacer about the Vikings and woodturning:

http://woodturninglearn.net/articles/vikings.htm

Rob