Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

green wood aggravation

Posts

green wood aggravation

#1

green wood aggravation

Charles Yawn

The aggravation of working with green wood. I turned (and posted here) this pen a few months ago. It was made with just-cut Mahonia wood. Another one, turned thinner, is okay for now. Just noticed this a couple of days ago. I just cannot figure how to make this look intentional. :\


Re: green wood aggravation

#2

Re: green wood aggravation

John Lucas

I would never turn a pen out of green wood. It will crack every time You can fill in the cracks of course but then it always looks like it has cracks that were filled.

Re: green wood aggravation

#3

Re: green wood aggravation

Jennifer Indy.USA

Ditto what John Said. Using green wood for a pen is big no-no.

Re: green wood aggravation

#4

George Balock

Re: green wood aggravation

George Balock

Charles,

If you have green wood that you wish to make into a pen, I would cut the blanks slightly oversize. Then I would dip the ends in Anchorseal and let the wood sit on the shelf for a while. You can always accelerate the process with a kiln or microwave. To drive home john and Jennifer's point, never turn a pen from green wood.

Re: green wood aggravation

#5

Brad Vietje

Re: green wood aggravation

Brad Vietje

Well -- on the bright side, it would have been a very nice pen ! :)

Green wood is great for rough-turning bowls or for thin turnings that will warp and distort, but not for anything that needs to stay put.

Green wood can be successfully air-dried or dried in a microwave. See Turning Green Wood, by Michael O'Donnell for details on using the microwave. Pens are one area where dry wood is a must.

Safe spinning,

Brad Vietje

Newbury, VT