Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

how do you make template of a large turning?

Posts

how do you make template of a large turning?

#1

how do you make template of a large turning?

phillip Medghalchi

High folks, for a long time I wante to find a very large capaity profile gauge so I can copy and make template of some of my large turnings so I cna recopy them for friend and customers. I looked on line and even locally went to an engineering supply store and no one seems to have anything like it. Even checked the archological supplier to see if there is such a thing, no luck ther either. The largest profile gauge I found was on line from some European company I I have to convert or pay in euro which makes it expensive, but the capacity was only 400mm whih will not do. What I am trying to do is to make template of the 15 3/4 dia. bowl so I can remake it for my sister. Anyone has ever doen this? An example is bellow.

Re: how do you make template of a large turning?

#2

Re: how do you make template of a large turning?

Mark Trenier

I think you want something like this?

http://www.youtube.com/watch?v=Pjep8oKTqzE

Re: how do you make template of a large turning?

#3

Re: how do you make template of a large turning?

John Lucas

Just cut out a piece if poster board close to the shape. Lay it up against it. Now lay a pencil flat against it so the tip of the pencil is about 1/4" away from the woos. (Half the thickness of the pencil). Now drag the pencil down the bowl. It will draw the exact shape of the bowl. Cut it out a d you have a template

Re: how do you make template of a large turning?

#4

Re: how do you make template of a large turning?

HeatherAinAK

I wonder if you could put a piece of poster board on the wall and shine lights to make a shadow. I don't know it it would distort the shape but maybe with a couple of light sources you could get it right. Just thinking out of the box.

Heather

Re: how do you make template of a large turning?

#5

Dennis in Southern Oregon

Re: how do you make template of a large turning?

Dennis in Southern Oregon

Having tried what you are contemplating a few times on a smaller scale, I can tell you that it is hard to use such a pattern effectively. You have to do a fairly good job of achieving the desired form before you can even check it against the pattern. Furthermore, unless you establish "must fit" diameters at the top and bottom of the work, you will chase your pattern to a toothpick. When (if) you finally get close to a fit, you will find that you flat spots and other artifacts that have to be smoothed out by eye to make pleasing curves and details. A better approach INMO is to use calipers to establish the diameters and positions of key points along the turning such local maximum and minimum diameters, points of inflection (reverses in direction of curvature), beginnings and ends of beads, coves, etc. and then turn by eye between these points to achieve a pleasing result that is consistent with the original. Unless you are turning multiple items that are to be displayed together, only approximate similarity is needed. Good form is much more important than an exact match.

Dennis

Re: how do you make template of a large turning?

#6

Re: how do you make template of a large turning?

Dale Miner

I agree with Dennis.

Re: how do you make template of a large turning?

#7

Re: how do you make template of a large turning?

John Lucas

Dennis I've done this technique a lot on different things and it works well. You just have to stop frequently and evaluate the shape. As you get close you just have to look at the high spots and take them off.

I made 6 salad bowls that all matched extremely close using the above technique. You do need to have good turning skills because it takes some practice to take off small amounts here and there to fine tune the shape.

I do agree with you on the method you mentioned No one is really going to check that close so if you take some measurements and sneak up on it, relying on your eye to judge the final shape you will end up with a good bowl.