Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Never ceases to amaze me

Posts

Never ceases to amaze me

#1

Never ceases to amaze me

Dale Bonertz

My kiln has been running for five weeks today. I have pulled 25 gallons of water out of it to date with this mornings take of almost 3/4 gallon. Now there is somewhere between 165 to 200 blanks in the kiln but this much water always amazes me. Sometimes I think someone snuck in and hooked up a water line to it. Not sure how much more I'll pull from this load or how much longer it will take to finish this load.

Re: Never ceases to amaze me

#2

Don Leydens

Re: Never ceases to amaze me

Don Leydens

Very interesting, Dale. Please keep us up to date on how it all works out.

Re: Never ceases to amaze me

#3

Re: Never ceases to amaze me

ron bauer

Dale, I am curious about a couple things. Is it a true kiln or is it a de-humidifier at ambient? Do you wax the blanks before putting them in? Do you get minimal cracking? Are they roughed blanks ( to +/- 10% rim thickness)? I am very interested in some kind of a "drier" but probably not as big as yours. Thanks for the post. Ron.

Re: Never ceases to amaze me

#4

Alan Zenreich

Re: Never ceases to amaze me

Alan Zenreich

Similarly, I wonder how much of the water is coming from the blanks vs from the air dehumidification.

Re: Never ceases to amaze me

#5

Re: Never ceases to amaze me

Dale Bonertz

I am not sure what you mean by true kiln. I would call it a true kiln since it has a heat source (oven heating element). It has three fans and a humidifier.

The blanks are roughed out at minimum 10% and usually thicker since I sell them and want to give my customers as much option as possible for finish turning them. I have very little loss and most of the time I can predict which ones I am going to lose due to knots or other faults in the wood. I completely anchor seal the blanks as I am loading the kiln. I feel this allows me to mix species in the kiln which most commercial kilns tell you is a no no. Some woods by nature want to crack (around here) like locust, oak and walnut in which I try to pay extra attention to where I load them in the kiln and how I turn them. I have had very little loss in these tougher species for us.

Alan, I live in a pretty dry climate and the kiln is pretty well sealed up. I imagine I am getting some moisture removal from the air but I think most is from the wood. My shop will get humid when roughing but the dehumidifier sets in the kiln. It varies from kiln load to kiln load on how much water is removed since some logs are wetter than others. A few loads ago I pulled 21 gallons and it was done. It just fascinates me from load to load how much water comes out.

Re: Never ceases to amaze me

#6

Re: Never ceases to amaze me

don stephan

Probably going to make some incorrect assumptions, but a 2 pound block of wood at 38% moisture, dried to 8% would give off 30% of 2 pounds or .6 pounds of water. 200 such blocks would give off 120 pounds of water. One gallon of water weighs about 8.3 pounds, so 120 pounds of water would be about 14.5 gallons. I hope someone will check my work and correct any errors.

Re: Never ceases to amaze me

#7

Re: Never ceases to amaze me

phillip Medghalchi

Dale, do you mind to take soem pictures for us to see if it's not too much trouble. I'd like to see how your kiln looks like and also, your email says comcast, so is it fair to say you live in WA, or OR state? If you do there is lots of moister in the air, then again I may be worng. Also, are these pen blanks or bowl blanks? Ho w long do you usually put your blanks in this Kiln for yo to achieve the dryness your looking for?

Re: Never ceases to amaze me

#8

Re: Never ceases to amaze me

Dale Bonertz

Phillip,

I have never posted a picture on this site but I will if you let me know how to do it. I have pictures since a gentleman on another site wanted to see my kiln so he could build one, much smaller though (he said). My kiln measures on the exterior 8' wide 7' tall and 3' deep. The actual area that I load blanks is 74" wide 74" tall 26" deep (the rest of the area is for the fans, heating element and dehumidifier.

I have a hose running from the dehumidifier to the outside and into a five gallon bucket. I generally empty the bucket every morning before I head to work. I know the kiln is done when it drops to a cup a day or less. It generally will go down real quick when dry - I mean real quick like in a couple to a few days from 12 per day to maybe 10 to 6 to 2 to done. I pulled about 11 cups a day over the last two days so I suspect it will drop quick now if the normal pattern holds true.

BTW I live in Fort Collins, CO. and we are in what is called a high desert. Pretty dry climate here, not like Phoenix but pretty dry.

Sorry Phil, I forgot to mention they are bowl blanks.

Re: Never ceases to amaze me

#9

Re: Never ceases to amaze me

Dale Bonertz

Don,

Not sure there are any errors but these blanks are much more than two pounds. They are bowl blanks in sizes from 7 inch extra thick to 17" about 2" thick and sizes in between. That is why the kiln pulls so much water due to the size and thickness of the blanks. My guess is most of the time the blanks start somewhere in the neighborhood of 22% to 30% MC when loaded into the kiln. This load was much wetter than normal since I came across wood that I haven't had in awhile and wanted to turn some of it right away. Good thing I turn left handed when roughing or I would have been soaked with this fresh wood. :)

Re: Never ceases to amaze me

#10

Re: Never ceases to amaze me

phillip Medghalchi

Dale, i try to send you a PM to tell you how I post. I am not sure if there is a instruction somwwhere on this forum to explain how it is done. But, would like to see how you set up your kiln. It would be very interesting.

I just sent you an email at 8:11pm my time. maybe 7:11 pm your time. Good luck.

Re: Never ceases to amaze me

#11

Re: Never ceases to amaze me

Dale Bonertz



The kiln is running so this is a shot of the doors and controls. Look at the bottom and you will be able to see the five gallon bucket that the water drains into from the dehumidifier.



Here is a shot of when the kiln was empty. You see the dehumidifier and behind it is where the three fans are located. They blow down a tunnel or chamber which is where the heating element is located. There is a partition wall on the right side of the dehumidifier that stops a couple of inches short of touching the doors when they are in place. You also can see the metro shelving on the right in which I stack blanks on and then drop the next shelf for the next layer and so on and so on.

I hope that gives you an idea how it works.

Re: Never ceases to amaze me

#12

Re: Never ceases to amaze me

phillip Medghalchi

Dale, thank you for sharing. You've got a serious set up there. I can say for sure this a first time I have heard of somebody taking time to do such a thing or set it up. You must really love turning to go this far and set up your kiln. I can't wait to see what you had in there this time and what kind of result you get. Would you be kind and share another pi. when you get your stash out this time and share with us the result. Like any cracks or splitting. And, also when you turn it, I am sure it's more fun to turn a wood that you know it's dry and you can go start to finish maybe in a day!

Re: Never ceases to amaze me

#13

Re: Never ceases to amaze me

Dale Bonertz

If I remember I'll take two shots. One with the kiln loaded and doors off and one of any losses. This load is about the eighth load that I put through this kiln. Like I said earlier I have very few losses and the ones I do lose are typically the ones that I knew when loading them that I would most likely lose. They may have a knot or other defect in them. Occasionally you will lose a surprise blank here or there but I attribute that to being my fault for not paying enough attention and cutting out all the micro checks that were there and I did not notice. It is a labor of love and not profit for sure but as I say it keeps me out of the bars - oh wait I don't drink. :)

Re: Never ceases to amaze me

#14

Final kiln results

Dale Bonertz

29.1875 gallons of water pulled from this load. There were 177 bowl blanks in the kiln, sizes ranged from 17" to 7" in mixed species. 14 came out with checks but 13 of these I knew when they went in they would check. They were knots or bark included lines which I don't consider these a loss since the separating is limited to the knots and included spots. Some people love these for their character and design opportunities. Only one was split from the rim down the side which I threw away.

I have three or four pictures I will put up for those that requested them when I get a chance to resize them.

Re: Never ceases to amaze me

#15

Re: Final kiln results

Mike Brazeau

Excellent review of what you are doing Dale. I am curious what impact the dehumidifier has on the temperature and the rate of increase in temperature as the dehumidifier is dumping quite a bit of energy. You have lots of mass so maybe doesn't affect it that much. The energy goes into pulling out the water. A friend built a dehumidifier kiln for crotch slabs and flat stock and had problems with too rapid a drawdown and temperature increase. I have a small thermal kiln which has worked out very well for me. It is documented at our guild web site http://www.ghwg.ca/techniques/Mike_Brazeau_Simple_Drying%20Kiln.pdf. I try and maintain a slow rate of temperature increase and have had almost no loss of rough outs. Takes about 3-4 weeks for a batch of bowls.

Re: Never ceases to amaze me

#16

Steven Antonucci

Love the science!

steven antonucci

Had missed the picture of the "in shop kiln"... pretty neat idea if you have the space...hate trudging through the snow to get to the woodpile, which is frozen to the ground anyhow...

Have you run a "control"- i.e. no kiln to see how much it has improved your yield? Here in NJ, I would probably get the same results as you just stuffing them in a bag out of the way for 6 months? Granted, you accelerate the results, but I am not in a hurry. I wonder if kiln drying them changes the color the way I've heard vs. air drying on flat boards?

More info welcomed.

S

Re: Never ceases to amaze me

#17

Re: Final kiln results

Dale Bonertz

The dehumidifier brings the temp up about three to five degrees when running it comes back down before it starts again. I start my kiln and bring the temp up to 100 and let everything inside acclimate for at least 24 hours. I then start the dehumidifier (DH) to run four times a day at 1/2 hour per cycle. I have the DH on a timer and want to pull about 3/4 gallon per day. I may have to, like this last load run two cycles for an hour and the other two for 1/2 hour to pull that amount. After a couple of weeks I turn it up to 105 and by the end 110 degrees. My heating element is on a thermostat so it stays pretty consistent in the kiln. I shoot to have them dry in 5 to 6 weeks. I can push it for quicker results but I find 5 to 6 weeks works fine for my purposes. BTW towards the end the dehumidifier cycles may be set for 1 1/2 hours per cycle to finish them off.

Re: Never ceases to amaze me

#18

Re: Love the science!

Dale Bonertz

I used to dry everything for my personal use by air drying. For most people that is a viable way to do it since most of the time you are not in that big of a hurry. I have not noticed any color difference from the hundreds of blanks I have air dried versus the thousands that I have kiln dried. As far as loss I got pretty good at air drying and with what worked in my shop I would lose around 5%. I would say that this is on average about the same or less with the kiln. The old kiln I used to use, I all of a sudden was losing over half of the blanks. Came to find out it was leaking water out of the bottom of the kiln onto the dirt so I did not know it was leaking. After tearing into it is when I discovered the problem. Thus why I built this kiln and changed some things from the old kiln.

My shop isn't that big 10' wide and 30' deep with 9' high ceilings. That is why when you see the pictures of the kiln they are always at a bit of an angle. I cannot get a straight on shot because my work bench won't allow me to get far enough away from the lathe for a good straight on picture.

I just enjoy doing this and helping others, who don't have the time, energy, equipment, wood source or etc., with an option to purchase dry wood blanks. Like I said before it is a labor of love since one can't make a living at it.

Re: Never ceases to amaze me

#19

Re: Final kiln results

Mike Brazeau

Thanks Dale. That is obviously the way to do it so the dehumidifier does not increase the temperature too much. I am going to pass this thread on to my friend. Best part of the kiln is once you get a routine it works pretty well and you don't have to pay that much attention to it.

Re: Never ceases to amaze me

#20

Re: Final kiln results

Dale Bonertz

I hope I got the picture sizes correct. I am loading these for two reasons. One to see if this idiot (me) can do it correctly. Two because I promised a few of you pictures.

This is a shot of the kiln opened, loaded and with dry blanks. I put the garbage can in the shot for you to get a feel for size of kiln. That is a 8' high garage door also. Sorry about the angle shot of the kiln but I have a work bench across from it and the shop is 10' wide. I cannot get far enough away from the kiln for a good straight on shot.


This is a shot of size range in the kiln. Largest is 17" smallest is 7".


As I mentioned I had 13 blanks similar to this one. Some may call this a loss but I knew when putting them in this would happen. I think it adds character to blanks. They are easy to fill. Only had one blank that split for no apparent reason from rim to almost base - threw it away.