Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

No turning for me

Posts

No turning for me

#1

No turning for me

John Lucas

Well I might sneak a little in here and there but I've reached a point where I have to stop and do something with the shop. It's just gotten out of hand in the last few years and desperately need to rearrange and probably build a few small cabinets or something to make storage and organization better.

Started rewiring yesterday. If your building a shop put in more wire than you ever think you'll need. I had to pull two wall panels off and they were both covered with tools and devices to hang tools. What a hassle. Got both new wires and circuit breakers in. finished that up this morning.

Got the new bandsaw in position and old one moved as out of the way as much as that is possible. It will probably sell pretty quickly so going to leave it right there for now.

Next project is to replace the table saw outfeed table with a workbench that has been in the way for a year. It will need some work and adjustable feet but that won't take too much doing.

Anyway if you don't see any turning from me it's just me sneaking over to the flat side to build some things for the shop and make it all more functional.

Re: No turning for me

#2

Re: No turning for me

Stuart Johnson

If your building a shop put in more wire than you ever think you'll need.

I'm covering all my walls with OSB. The wire is run through conduit and mounted on the outside. This isn't the prettiest, sleek method but I can add or change things very easily.