Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

70's Pre Scroll Chucks 6-in-1 Metal Chuck

Posts

70's Pre Scroll Chucks 6-in-1 Metal Chuck

#1

70's Pre Scroll Chucks 6-in-1 Metal Chuck

charlie belden

Our former turning club president is a turning tool junky, and has been since the 70s. If there's a new turning related tool - he has one. At our monthly club meeting, the President's Challenge was to turn a piece using a holding method you haven't used for at least five years.

Our former club president used an OLD pre-modern scroll chuck - the 6-in-1 Chuck.




Remeber that this came out when the only scroll chuck available was from metal turning lathes - the ones with the sharp jaws and knuckle cutting/tearing parts sticking out. At the time, this chuck was a LOT safer though a bit more complicated to use.

Methods of holding pieces so they can be turned has come a long ways in 40+ years.

Got an old and unusual method of holding a piece? A photo of it would be cool to see.

Re: 70's Pre Scroll Chucks 6-in-1 Metal Chuck

#2

Re: 70's Pre Scroll Chucks 6-in-1 Metal Chuck

Cyril Griesbach

One of our club members has several of these and often uses them when doing a demo.

Re: 70's Pre Scroll Chucks 6-in-1 Metal Chuck

#3

I used to have one of these ........

JamieDonaldson

....".Combination" chucks way back when, and they were a PITA to use! :\

Re: 70's Pre Scroll Chucks 6-in-1 Metal Chuck

#4

Re: I used to have one of these ........

charlie belden

Using this thing is, as you noted, a "challenge". But at the time, it was probably the safest way to hold a piece for hollowing out the inside of a piece, be it a bowl, lidded box or hollow form. There's really only so much that can be done just holding the piece between centers.

You've got to wonder what turners will think looking back at the tools and lathes we're using today. The technology, tools, machines and techniques being used today, even by the "cutting edge" turners, will likely appear primitive and quite limiting.

Re: 70's Pre Scroll Chucks 6-in-1 Metal Chuck

#5

Re: 70's Pre Scroll Chucks 6-in-1 Metal Chuck

Wally Dickerman cox.net

I had the same set. Mine also had a 1-inch pin chuck. The 4-jaw chuck that is so popular today didn't come on the market until 1989 or 90.

Charlie, the safest way to hold a bowl blank on the lathe is still the faceplate

Re: 70's Pre Scroll Chucks 6-in-1 Metal Chuck

#6

Brad Vietje

I Have One of These

Brad Vietje

On semi-permanent loan from a friend... I've had it about 4 years, but haven't used it yet. I was figuring I would set it up for some small production item so the set-up time and effort would be spread over many pieces, but it never rose to the convenience level of my Stronghold or Supernova chucks.

Still need to get that thing out and play with it sometime.

Safe spinning,

Brad Vietje

Newbury, VT

Re: 70's Pre Scroll Chucks 6-in-1 Metal Chuck

#7

Re: 70's Pre Scroll Chucks 6-in-1 Metal Chuck

phillip Medghalchi

Charlie, back then I was in middle school and didn't even have any idea that one day I become a turner and wonder how was it before that, and how really the wood turners did it? I am hoping I am not hijaking your thread. You just made me wonder and like to find out how they did it in 40's or so? I knoe we sre pretty much have it easy now with electronic var. speed and all the fancy stuff we got now.

Re: 70's Pre Scroll Chucks 6-in-1 Metal Chuck

#8

Yep...Turning Was Much Different Then..

Wally Dickerman in Arizona

I started turning in 1936. Lathes were made for spindle turning. Top of the line lathes had a 12 inch swing. We did have electric motors...no other electronics. Speed change was by belt change. Tools were made for spindle turning so if you wanted to turn bowls you had to make some of your own tools. Scrapers for hollowing.I did have a wide, forged spindle gouge, which helped. No dust system. No chucks except a machinist chuck...A real knuckle buster and it didn't hold the wood very well with 3 narrow jaws. We used faceplates. Plugged screw holes or used felt or cork to cover them. No high speed steel, no bowl gouges, very few gadgets to help. Books were all on spindle turning. No videos, websites, clubs, symposiums and in fact very few turners.

I'm a lot older now but turning is much easier.

Re: 70's Pre Scroll Chucks 6-in-1 Metal Chuck

#9

I still have one of those, don't use it much

Mike Foster

:D