Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Neighbor Bowls

Posts

Neighbor Bowls

#1

Neighbor Bowls

Don Orr

It's been a while since I posted anything, so I thought I would prove that I actually do turn some wood now and then. Our next door neighbor had to take down a nearly dead Elm year before last. They called it Slippery Elm (Ulmus rubra). I asked for some of the wood and promised to make something for them. I did some simple Christmas ornaments last year for them. I had secretly told the husband that I was going to do something bigger at some point so this is what came of it. Four bowls since there are 4 people in the house right now-2 parents-2 daughters. Sizes are in the 10-13" diameter range and are finished with Bush Oil. I delivered them just after Christmas and they were quite surprised and pleased to have a memento of a tree that meant a lot to them. The other children will get bowls made from the cores taken from these pieces.

Comments and critiques welcome.

Re: Neighbor Bowls

#2

Re: Neighbor Bowls

Tony - Memphis

Nice project and nice work. I especially like the thicker rim models. Reminds me of the old ceramic bowls I have. I'm sure they will be appreciated and admired for many years.

Tony

Re: Neighbor Bowls

#3

Re: Neighbor Bowls

Sergio

Nice bowls. I love elm wood. Could you tell me more about the Bush oil. Never heard of it before.

Re: Neighbor Bowls

#4

Re: Neighbor Bowls

Don Orr

Sergio,

Bush Oil was developed by a local woodworker and high-end furniture builder. It is a penetating, curing oil,similar to a danish oil with a wipe on , wipe off application. I don't know the base oil but I have been using it for years with excellent results. It can be overcoated with most any film finish when cured. I'm not sure how widely available it is, but it is popular here in the Northeast.

Re: Neighbor Bowls

#5

Lyle Jamieson

Re: Neighbor Bowls

Lyle Jamieson

Nice rim treatments. That little detail makes a big difference. Some tilted in, some tilted out, some rounded nicely, some softened corners. Gives each bowl a personality of its own.

Re: Neighbor Bowls

#6

That "slippery bark elm" is a favorite ....

JamieDonaldson

...tree among basket makers. When it is turned green the expansion through the pith will turn a round bowl into a serious oval as it dries! ;)

Re: Neighbor Bowls

#7

Keith Tompkins

Re: Neighbor Bowls

Keith Tompkins

HI Don, Nice work, as usual. Looking forward to TT! :D

Re: Neighbor Bowls

#8

Re Bush Oil

GaryG in MD

That's my go-to oil.

It's like a very thick Watco Danish.

The important thing about it is that it has about four times the solids, so one or two coats is all you need, instead of 4-5 coats.

Just make sure you wipe it ALL off, just like any other oil finish, or you'll have a mess.

Also, before you buff it, make sure it's not just dry to the touch, but fully cured.

...GG

Re: Neighbor Bowls

#9

Thanks Everyone !


Re: Neighbor Bowls

#10

Re: Neighbor Bowls

George Guadiane

Nice to see your work, even from a distance.

I'm certain that they meet your exacting standards, and from the picture, they look very nice.

G

Re: Neighbor Bowls

#11

Re: Neighbor Bowls

phillip medghalchi

Don, very nice and well done work. I like the idea that every single one of them has a different design. I ahve to look up the slippery Elm.

I just finished a Black locust bowl and I wonder if the guy whom I go it from amde a mistake which I doubt that. He lives in Northwest of USA and he seems to know his stuff very well he had lots of this timber cut up under a huge tarp, However, it has the same patten look. It makes me wonder if the locust is from the same family of the trees.

Well, your neighbor should be very proud of your work and I am sure his tree in this form should last for generations. Thanks for sharing.