Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Spalting wood

Posts

Spalting wood

#1

Spalting wood

Ernie miller

does anyone know if Bradford Pear will spalt? and if it does will it look any good or will it end up looking like elm which always looks like mud in my eyes? I was thinking about tossing a bunch in my spalt pile but don't really want to ruin it if it is going to turn out nasty

Re: Spalting wood

#2

Re: Spalting wood

john Veerkamp

Not sure about bradford but other pears will spalt, often with dramatic results. In my experience most fruit woods will spalt. Go for it, nothing to lose.

Re: Spalting wood

#3

Re: Spalting wood

Ernie miller

kinda what I was thinking I have saved out all the crotch wood and will toss some in the spalt pile. the Birch is flaming and spalting pretty good right now. just started turning that

Re: Spalting wood

#4

Re: Spalting wood

phillip Medghalchi

Something like this/







all of these are form the same tree. It was left on the grounds for long time b4 I got my hands on them.

It's a beautiful tree and wood to work with cuts like cherry. my only regret is that I am running out of my pile.

Re: Spalting wood

#5

Re: Spalting wood

Ernie miller

Cool I have found that if you toss new wood in the spalt pile it will push the new wood along a little faster. I am just getting back to turning and wood working after about a 4-5 year break to rehab houses. cant do any more of them untill the ones I have now sell

Re: Spalting wood

#6

Spalting this time of year?

Dick Coers

Nothing is going to happen this time of year in that pile, well maybe you live in Southern Florida? What will happen, if you live in the northern half, is that with the dry winter air, you will have kindling in no time. This dry winter air we are in will crack a fruit wood really quickly! Maybe small pieces will be okay for you?

Re: Spalting wood

#7

Re: Spalting wood

Jim Breeden

I poured some beer over my pear, sealed it, wrapped it in black plastic, and viola, red spalt. :) Took about 2 months. Looks kinda like the red of Phillips' pics.

Re: Spalting wood

#8

Re: Spalting wood

Emmett Manley, Lakeland, TN

I've worked with a good deal of Bradford pear and I don't ever recall seeing any of it spalt. Bradford pear is a wonderful turning wood but spalting is not one of its strong points. Use it for something else as it is one of those woods much more likely to just rot than to develop those wonderful spalt lines and colors prized by woodturners.

Re: Spalting wood

#9

Re: Spalting this time of year?

Ernie miller

the wood is tossed in the corner of a green house under a bedding table. it seems things spalt faster if there is spalted wood mixed in. watering the plants keeps the wood a little damp all the time which also helps.

Re: Spalting wood

#10

Re: Spalting wood

phillip medghalchi

Emmett, mine were done all on its own, so maybe youlive on the wring side of the river which is cooler. Down here in TX anything will spalt and I am just enjoying the chance this wood gave me to fashion few articles from it.

All he needs is a good source of heat to kick the things started.

Re: Spalting wood

#11

Everything you ever wanted to know about Spalting *LINK*

Ralph Lindberg

There is a Turner that has her PhD in Forest Products, her thesis was is wood spalting.

Dr Sara Robinson has done numerous programs on spalting woods, including at the National Symposium

One of the things I have learned from her is every wood will spalt.


Northern Spalting

Re: Spalting wood

#12

emm, no

Ralph Lindberg

If you read through the link I provided to "Dr Spalt" (Sara Robinson), you will see that she was spalting wood year around, while going to college, in the north.

Locally (west of Seattle) this is the prime time to spalt wood, all we have to do is leave it outside (it's 45 with 95% humidity).

Re: Spalting wood

#13

Drink your beer...

Ralph Lindberg

... don't waste it.

Beer doesn't come from wood-spalting fungus, but from yeast.

Dr Spalt has demonstrated in the lab, don't use beer, spalted wood (fungus) and humidity are the key

Re: Spalting wood

#14

it depends...

Ralph Lindberg

What spalting wood requires is the right wood-spalting fungus and humidity. Temperatures are also involved as the fungus grow very slowly if the temperatures are too low.

So if the temps are below freezing, yup, some heat may be required.

Re: Spalting wood

#15

Re: Drink your beer...

Jim Breeden

Ralph - Pear is not the only wood I use beer on. All have spalted using this method: Beer, sealant, black plastic, and wait. Besides, in this part of the Southwest the humidity very seldom gets above 25%.

Re: Spalting wood

#16

read...learn...

Ralph Lindberg

She makes a special point about beer in both her writings and talks

You would be best off spalting in a plastic tub with snap-on lid, keeping the wood about 30 to 40% humidity and temps between 40 and 70 F

Re: Spalting wood

#17

Re: read...learn...

Jim Breeden

I have did the tub trick - plus - the beer thing. Whether someone believes it or not, both worked for me. I'm not here to argue one point or another on who is correct or not. Bye.

Re: Spalting wood

#18

I can guarantee you....

Dick Coers

there is no spalting going on around my place. Single digit temps at night, buried under snow.

Re: Spalting wood

#19

All I know

Ernie miller

All I know is if you have spalting wood and you toss some non spalted wood in with it it will spalt faster. it helps to have a little moisture and heat. I find a small pile under the neighbors growing tables in the green house works well because they get watered a couple times a day and it is always hot and humid. on top of that they are out of the way. the other thing I know is some spalted wood is not pretty. I guess that was the question I was asking?

Re: Spalting wood

#20

I wrote to Dr. Spalt......

Barry Irby

Asked questions about how Fungi affect wood turners and Home Inspectors. She sent me a very nice response. I wrote and asked permission to post her answer here and if she consents, I will.

Re: Spalting wood

#21

Re: I wrote to Dr. Spalt......

Ralph Lindberg

That's one of the areas she covers in her talks.

Info obtained from her (and others)

Basically, the fungi responsible for spalting are common and found throughout the woods growing around us all the time. Thus we are all exposed to the various fungi.

When we we stop the splating process (by letting the wood dry) the fungi quickly dies, it requires a rather high level of moisture to remain active and growing.

Spalting fungi require moisture and wood to grow, no wood (hopefully) in your longs means the spalting fungi will not thrive there.

People with lung and/or breathing issues should always wear protective gear

Anyone working with wood dust should always wear protective equipment to keep their lungs free of wood-dust.

Wood-dust is more dangerous to our lungs then spalting fungi.

At one of her talks I attended, when she finished her section on fungi safety, one of our turners raised his hand. He is also a MD specializing in pulmonary, he said, yes, we are at more risk from wood-dust then fungi.