The thermometer in my shop says 50. No way. my hands get freezing cold in minutes. I've worked outside in 50 degree temperatures all the time with no problem. Can't figure out why the shop feels so cold. The thermometer is 10 feet from the heater. I'm much closer than that when I'm at my table saw, workbench or lathe.
I'm starting to think I need a heater attached to one of those walk around thingies they use in the hospital to hold your IV's. Hey maybe a better thought might simply be a Jack Daniels IV.
It's 6 degrees outside which is really cold for Tennessee. You guys up north can have it.
don't want it! Its -14 this morning. Glad I am retired. I am not even walking across the yard to the shop today.
Menards sells a glove that I use when weeding the garden. It is very thin, form fitting and the palm is coated with a rubber membrane. No reason you couldn't turn while wearing them.
I am near Richmond, VA and it 54* OUTSIDE. Raining. They (The weather guessers) tell us it will be about 10* tomorrow. You are scaring me to death. Go outside and inhale. A lot. You and anyone else can keep it. When you exhale, blow to the west. God Help the plumbing around here.
I bet your equipment is a lot colder than fifty. YOU are suffering from radiant losses. Heat radiates from the warmer body to the colder surface at some rate that is governed by the temperature differential to the fourth power. My shop warms up abut the time I am ready to leave.
1 - Move the thermometer to where you work... no sense in knowing the temperature of someplace you're "not"
2 - Get another thermometer to confirm the reading (and also become confused... the old saying is "A man with a watch always knows what time it is, a man with two watches is never sure"
This won't make you warmer, but it might help explain why you feel colder than the current thermometer indicates.
I just listened to the weather report for today here in central Iowa.... she said "...today it will not feel any warmer than -20*F" - today's high is forecast at -6*F. Our overnight temperature was -21*F with a -41*F Wind Chill. And we're not the worst - I don't know how those folks in Minnesota and Canada deal with this "normal" kind of thermal abuse every year. Winds here are from the west-north-west so it's on its way to you John! Get done what you need to do today, because in another day or two it'll really be unbearable. (This is one of the few times of the year when I am thankful for a basement shop.)
The problem might be your level of physical activity. If you are expending more physical effort you will be warmer but if you are just puttering around your internal furnace and circulation aren't doing much. When you were working outside you may have been working harder or moving a lot more.
Us guys up north dress appropriately and to a certain extent get acclimatized to the cold. When we are complaining about how cold it feels in the beginning of December, the same temperature at the end of January would be "warm". Of course the cold gives us something to complain about and we are good at it.
When the hurricanes and tornadoes are wreaking havoc in the warmer months we often say, "Give us the cold anytime".
We've got 10" of snow and minus 13 degrees here in Broad Ripple IN. The news people keep saying to check on the elderly people in your neighborhood to make sure they are okay. I hope I don't get a bunch of phone calls.
Barry I had the heater on in the shop all night so you would think the equipment would be at the same temperature but you are right, the metal feels quite cold.
John, go hug one of your favorite bowls or turned articles you made and it make you warm and fuzzy inside. That may work and won't cost you a lot either.
John, the difference in how 50 degrees feels to you inside your shop versus outside is probably explained both by your level of physical activity AND the presence of sunshine.
When he sun is shining on your sweater or coat on a cold day, place a thermometer on your garment and you will be surprised at how warm it will be. Air temperature is just that -- air temperature. You are concerned about your temperature.
Also, as others have pointed out, it takes a long time for warm air to warm up the mass of metal and wood in a shop. A cubic foot of air does not have much heat capacity -- a cubic foot of cast iron stores a lot of heat.
A vestige of our evolutionarty ancesters, we inherited what's known as The Mammalan Dive Reflex. If we touch something cold, like the metal on a gouge, the head or tail stock handle, a metal tool rest, it can trigger this response. Basically the body thinks it's about to get much colder and pulls much of your blood and heat in towards your vital organs (you decide which organ or organs are vital) - drawing it away from your extremities. And the body has a priority system - ears, nose, lips, fingers and toes the first to be sacrificed if necessary. Once the reflex is triggered and blood - and heat - are withdrawn from the extremities - they get colder.
It's an absolute rarity, but you've been colder than we are up in Vermont! We've already had a few -20F mornings, and a few days recently with a high temp of -3, but last night we got a ton of rain, and it was way up in the 30's today... Lost about a foot of snow on the ground that melted from all the rain and warmth. Driveway and dirt roads are sheets of ice -- not fun.
Tonight we're headed back below zero, and a high of about 5-6 degrees tomorrow, and windy. These are the times I'm glad I live in a straw bale house with walls that are 16" thick! No heated shop though
Can't say we like it up North, either, but we're generally used to it, and have insulated pipes and all to handle it. Good luck to all those suffering through this cold snap.
What is really neat about this latest weather is that every state had freezing temps except Hawaii - 49 out of 50! Now I'm sure that doesn't happen every day. Hit -10 here last night -8 right now.