Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Broke tool yarn bowl

Posts

Broke tool yarn bowl

#1

Broke tool yarn bowl

james jacomb

Seems I have a pattern in my life where I start something then set it aside maybe to finish it later. This project started maybe eight years ago as a simply turned bowl, but after roughing out the shape I started to remove the interior and immediatly snaged the wood with my tool, guessing a scraper, then broke my six inch face plate I have had for 37 years. So I set aside the piece in some dark corner, eventually I bought a new face plate (after market) since I do not own a chuck. Then last year my daughter who loves to knit mentioned she would like a yarn bowl, Ah! out to the studio we go and we find this old blank roughed out, but alas it's almost cracked in half due to shrinkage! Since I did not have anything else avaliable that fit the size requirement handy my daughter suggested we epoxy the cracks and add some filler for interest. Ok I'll try it, then I left town for work, fast forward nine months and I am back in the shop in December trying to get this thing going, I did epoxy the cracks and added some glitter towards the outside for color and interest. Remounting and reroughing went ok but I did manage to brake my new bowl gouge (previous post) then I thought one of them fancy sanding disks that fit a drill sure would help finish the inside of the bowl slick! So I swung by Grizzly one day I was in the big city and bought a 2" sorby sanding disk. First time I used it the little velcro fingers melted on it, my bad. In all I broke three tools getting this thing done. My daughter is happy with the result and I was surprized how it turned out myself, I think the wood is hackberry. Now to get back to those kitchen cabinets I started 19 years ago!

Re: Broke tool yarn bowl

#2

That's quite a story, and you are......

JamieDonaldson

...a persistent fellow, in spurts! I would say that is indeed Hackberry, and you might benefit from turning assistance in order to not break any more tools or hurt yourself in the process. ;)

Re: Broke tool yarn bowl

#3

Re: That's quite a story, and you are......

james jacomb

Yes we constantly need to be vigilant when it comes to safety. I work in one of the most dangerous occupations so I try and carry the safety culture into all my other activities, that being said I have not had a workshop or instruction since the late 70's when I was fortunate to attend a class with Dale Nish, he even signed my book! In the 37 years I have had my lathe this is the first time I have had problems. I think the reason I broke my face plate was the blank was not parallel with the plate and I did not start to remove stock from the edge nor the center but simply started to feed into the midcenter instantly wedging my scraper and braking the plate at the mount. I hope to retire in seven years then I shall have time to attend some classes and folk schools. Currently there is nothing near by for clubs and when I'm working it is out of the question.

Re: Broke tool yarn bowl

#4

Brad Vietje

Re: That's quite a story, and you are......

Brad Vietje

Hey James,

Great looking yarn bowl, no matter how hard it was to get there! Now for the good news: it really isn't supposed to be that hard!

I think the main issue is that you've been hollowing into end grain, which is best done almost the reverse of hogging out a side-grain bowl. If you can find anyone relatively nearby to turn with this would be a good one to re-do on another end-grain blank, and work out the most efficient process.

Lots of people will tell you you need this expensive new gizmo, or that ingenious new technology, but a drill bit, a bowl gouge and a scraper will do this very well indeed -- no nano-carbide-powder-metal-fancy-dancy stuff at all! Some newer tools are a little easier, or may last longer, but this is a basic challenge, and basic turning tools are up to it. With a little coaching, I think you'd have a MUCH easier time with the next one!

Safe spinning,

Brad Vietje

Newbury, VT