Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Big Bowl to end the year.

Posts

Big Bowl to end the year.

#1

Big Bowl to end the year.

david

Probably my last bowl of the year, and it is the largest diameter I have attempted. The wood is Cook Island Pine, and the diameter is 21-1/2". The log was 23" x 27" oval, and had to cut it round to fit on my Vicmarc. Used a chain saw with angled cuts to reduce the weight. This piece is rough turned with no sanding as yet , but because it is wet and thin enough you can see the translucence with a light behind the piece. Walls are just over 1/8" and about 3/16" at the bottom. Keith Thompkins' Gage'T was invaluable in measuring wall thickness past the reach of my fingers. This basically a regular bowl shape with a slightly flared lip and a thickened edge with a slightly undercut rim. Will wait a few days for the tenon area to dry more and stiffen up before I reverse chuck it and turn away the tenon. The translucence will go away when the wood dries, but should return after multiple soaks in the oil mix. Fortunately I have a large enough barrel to soak this piece.

Re: Big Bowl to end the year.

#2

Re: Big Bowl to end the year.

Don in Central Illinois

Looks great! Well done.

Re: Big Bowl to end the year.

#3

Brad Vietje

Beautiful, David  Happy New Year!


Re: Big Bowl to end the year.

#4

Bill Blasic

Re: Big Bowl to end the year.

Bill Blasic

David,

Very nice, can't wait to see the finished product.

Bill

Re: Big Bowl to end the year.

#5

That's a Beauty.....

Barry Irby

But it "MUST" have the pith right in the bottom? Right? Wow! that chuck foot looks tiny compared to the bowl. Looks like something I would do because that's the biggest set of jaws I have. If the bottom is 3/16" thick, that's how long the fibers are. Woudln't take much to rip the bottom out. BTDT :( I'm just sayin, be careful. Late in the game to ruin it now. Don't do what I have done and get Cavalier. Looking forward to seeing the finished product.

Re: Big Bowl to end the year.

#6

Keith Tompkins

Re: Big Bowl to end the year.

Keith Tompkins

Very impressive David! Happy New Year from Lisa! Me too!

Re: Big Bowl to end the year.

#7

barry rockwell

Re: Big Bowl to end the year.

Barry Rockwell

What a beautiful piece David! It would be impressive with any wood, but with that wood it's fantastic. Happy New Year!

Re: Big Bowl to end the year.

#8

Don Leydens

Re: Big Bowl to end the year.

Don Leydens

That's a big boy, David. Very nice job keeping it together. Look forward to the end result.

Re: Big Bowl to end the year.

#9

Re: That's a Beauty.....

david

Yep, been there and done that too. Have a bunch of funnels laying around to remind me of what happens on wet thin bottomed end grain pieces when you apply tailstock pressure over a small area.

Re: Big Bowl to end the year.

#10

Re: Big Bowl to end the year.

david

Thanks, Kieth. You must have had some cold weather where you are. It is about 72 degrees outside and the sun hasn't come out yet!

Re: Big Bowl to end the year.

#11

Re: That's a Beauty.....

Barry Irby

I bumped one with an elbow, rather gently, pulled the entire chuck foot loose, out about 50%. Seemed very unfair. Actually pressed it back in an soaked it with thin CA, but I never felt the same about the bowl.

Re: Big Bowl to end the year.

#12

Outstanding!


Re: Big Bowl to end the year.

#13

Re: Big Bowl to end the year.

Mike Rubes, Cary, NC

Hi David,

That is awesome. I would love to see a pic of the finished bowl. Did you find that the bowl was flexing much as you spun it that thin? That is going to be wonderful when it is done.

I hope all is well in Hawaii. We are having a very mild winter so far, just wet.

Take Care,

Mike

Done in the shop for today in Cary, NC

Re: Big Bowl to end the year.

#14

Re: Big Bowl to end the year.

david

Mike, there was a little flexing when sanding on the lathe, but that can be attributed to the pressure of sanding. It helps that I held off 3 or 4 days before turning off the tenon and sanding. The almost dry piece was much stiffer.