Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

good chatter work video *LINK*

Posts

good chatter work video *LINK*

#1

good chatter work video *LINK*

John Lucas

I haven't used chatter blades as long and flexible as his. I'll have to try that. One thing I do differently is to tilt the blade left or right to create an even different look. I do like the idea of shaping the tip convex or concave. that has some interesting possiblities.


http://www.youtube.com/watch?v=3qWpqmBvprA

Re: good chatter work video *LINK*

#2

Steven Antonucci

I don't see the need for more than one chatter?

Steven Antonucci

I have a small section of bow saw blade that is ground to a narrow 1/4" round profile. Like you, I will tilt left or right to change the pattern or vary the speed or distance.

I would think the flat ground end and flat presentation would tend to break fibers at the end of the pattern. Perhaps the evidence goes away when you cut you line detail in? I just use the point of a skew to do that.

If you have ever successfully colored and then cut chatter cleanly, I'd love to know how.

Steve

Re: good chatter work video *LINK*

#3

Steven Antonucci

i stand corrected

Steven Antonucci

Found another one I made a couple of years ago... looked pretty close, cuts a completely different pattern. Go figure

Steve

Re: good chatter work video *LINK*

#4

Hey I learn something new every day

John Lucas

Usually it's that I'm not as smart or good looking as I think I am. :)

Re: good chatter work video *LINK*

#5

Mike Stafford

Re: I don't see the need for more than one chatter

Mike Stafford

I have one commercially made chatter tool and a couple of others I made myself. Different shapes do result in different patterns on the wood but how much you project the blade and at what angle it is presented can also change the pattern.

Of course the speed of the wood also makes a difference. The hardest thing for me is to recreate a pattern that I particularly like on the next item I want to decorate. I guess I should write down the speed, overhang, angle etc.

Re: good chatter work video *LINK*

#6

George Taylor

Too much work to record it all ...

George Taylor

... it could get in the way of my FUN.

Re: good chatter work video *LINK*

#7

Steven Antonucci

one more factor

Steven Antonucci

My go to chatter tool is made from a bow saw blade. The one I found today is made from a piece of band saw blade. I have also use the disposable pull saw blades and a jigsaw blade. I make the profiles the same and they all cut different patterns. The band saw blades wear out fast, and the jigsaw blades tend to snap. The bow saw blade has lasted a very long time.

If I get a second, I'll post a picture of the two tools and the patterns they cut.

Re: good chatter work video *LINK*

#8

Re: one more factor

John Lucas

I bought one of the Bonnie Klein replacement blades and built my own handle. My other ones uses the hacksaw blades that they use to cut the metal 2x4's I find them at commercial construction sites. They just throw them down.

It's impossible to repeat the textures because even the wood changes how it works. There are to many variables. How springy the steel is. How far it's extended from the tool, how far the tool is extended over the rest. The speed of the lathe, how far you are from center, the angle of the tool and apparently the shape of the tool. OH yea and how hard you push the tool against the work.

Re: good chatter work video *LINK*

#9

Re: good chatter work video

dougturner

A couple of years ago I visited a wood turning school in japan and they have dozens of hook chatter tools. I saw a lidded bowl about 18" diameter that had chatter work in a band about 6 inches across. I watched a DVD of chattering technique with hook tools by one of the "national treasure artists" that was about 2 hours long which unfortunately was not for sale to the public which demonstrated fascinating chatter technique. This technique has been in use for centuries in japan and has developed much farther than in the west.